Tercel4WD.com

8es it looks amazing! How much did you give for it? What are your plans?

Cheers,

Link only; I am not the seller.

https://portland.craigslist.org/mlt/cto ... 74399.html

lowbuck,

I am working with a guy that does vinyl vehicle wraps. I specifically looked for one who did RV style striping as I figure that is most similar.

That orange would be out of this world if you pull it off!

^
Looks like the copper core is 76 bucks on rocky.

http://www.rockauto.com/en/moreinfo.php ... 71&jsn=371

Hey, So I have a really nice T4 and am trying to keep it nice. I had a guy swap the rear wheel bearings and front struts. He asked me to bring 4 qts of gear oil do I did. I asked him what he did with it because I assume with that amount he did a drain and fill on the manual trans and front different...

I used all the Philips Ultinon bulbs (combo of rockauto and amazon). I think total spent was 150 or so...but it looks nice, increases safety and I had it so I spent it! 150 isn't so bad when you consider it was 15 bulbs that'll last 5 years minimum

Cheapest core on roackauto is 43 bucks Petros. I guess less the 5% discount they offer to pretty much anyone

Given that it's such a b$@#% to get out I would go new or go home!

Freshly detailed. Broke some clips on the trim and will need to find new ones for driver's side door. New: Front struts - KYB from rock auto Rear wheel bearings - Beck from rockauto Wheels (mr2 triangles 14") LED lights - dome, brake, side, back, parking Need to modify my flasher before turns g...

Hmmm.... well if I had to guess I would say 93 degrees? I'm bout ta do a vinegar flush of the heater core and replace the foam in the flaps while I have the dash cover off to install the inclinometer.... I'm hopeful to get up to 115 degrees

Hey folks, anyone reading know if the described procedure will work on the below photograph? It's from a 84' SR5 It appears I do have the 3.3uf and 4.7uf capacitors, just in a slightly different format. http://preview.ibb.co/jvjd1S/20180210_180015.jpg http://preview.ibb.co/e1kkgS/20180210_180002.jpg...

If anyone reads this I have everything I need now! I mean no one from the forum offered anything but I did find it at junk yards and via craigslist so I'm good!

Now I just need time to start strapping things on!

Looks like you didn't get too many responses yet!?! Any decision? If it were me and I was so minimally invested (800 bucks!) I would likely walk. If what you need is transport 'like today'. If you want to work on it in your free time and don't mind being hassled by the mechanical gremlins of a 30'is...

Thank you Folian! I'll see what I can get done about making myself one! So many cool things on this forum (from 2013)! Sad that I missed the boat on many of them.


Cheers

I like the spoiler! I am excited to see how you get it mounted!

Hmmm. I want one of these! Doesn't look like DLB or rabalc have been online recently though! I'll send em PM's and see what happens! Anyone else buy 1 too many?