Tercel4WD.com

Hmm. My guess would be that my LED bulbs are perhaps wired opposite to yours? I'm assuming all LED bulbs come from places with little to no quality control so maybe it might be a tossup as to whether a bulb will work out of the box. FYI, these are the ones I bought: https://www.amazon.ca/dp/B07GTL2Z...

No, an LED backup bulb should work just fine. I recently swapped in a super bright one, no issues at all with it. Do you have a few other known good LED bulbs you can test it with?

From my experiences, I suspect that the cause of the distributor advance diaphragms rotting is largely engine oil contamination from a leaking distributor o-ring. The oil runs down the dizzy and leaks into the advance unit and breaks down the diaphragm material. I've noticed that the tercels I've ha...

Did you get the distributor? How much was it? Are the vacuum advance diaphragms in good shape? Dizzy's are one of the spare parts I particularly like to keep around. Lots of little components in there that can fail so it's nice to be able to swap a known good one in and rule it out as the issue when...

Welcome, SR5. This forum isn't as active as it used to be so I'm not confident you will find anyone here with experience completely removing all the emissions stuff from the stock carb. I know that some other non-current users here did so in the past though so I recommend searching here to find thos...

it says the AS system supplies filtered air to the cat to aid in burning HC and CO. I would just find a used air filter housing that has the correct AS stuff on it (remember there are a few versions -- Federal and California, and they are different) and swap it in. Whoops, I was mistaken here. I di...

I don't believe the flywheels for 3E engines will work for ours but I'm not positive. If your FWD hatchback is automatic, it won't have a flywheel. I think the best option would be to buy a used one from someone here or on the fb group and get it machined. No shims are required for that, I have had ...

Might be a complete newbie question here, but is there a difference between a carb from auto and manual? I am swapping my 83 FWD hatchback from auto to manual transmission... I know it has some kind of linkage that goes to the auto trans right? Is this not on the manual car carburetor? How do I go ...

Yeah looking at the FSM pic Chris posted, it says the AS system supplies filtered air to the cat to aid in burning HC and CO. I would just find a used air filter housing that has the correct AS stuff on it (remember there are a few versions -- Federal and California, and they are different) and swap...

I just replace the output shaft and 4WD selector shaft seals this past weekend with SKF 12745 and SKF 552505 respectively. I cleaned everything really well and parked uphill overnight to put as much oil to the back of the transmission as possible. I placed a piece of cardboard under the car to chec...

I'm not sure how desperate you are or how much you're willing to spend on shipping but Mr Wrench has fenders listed for sale in this post:

viewtopic.php?t=16207

The fenders from any Tercel 83-86 (2 door or 4 door hatchback, FWD wagon, 4WD wagon) will work for you. Have you looked on car-part.com? That's a good resource for NLA parts.

Yes, the guy is correct. I can't remember what it's called, 'air suction' maybe? Anyway, download the factory service manual (FSM) here, go to the emissions section, and you will find info on it there. I might have the name wrong but if you flip through that section it will be obvious when you see it.

The mirrors from any 85-88 wagon will fit yours, FYI. The ones on 83-84 wagons are different though -- they will fit require some modifications best just to stick with the 85-88 wagon ones.

Have you tried car-part.com? It's a great resource for finding parts like this.

I am not seeing the ‘new topic’ button from my iPhone. I just got a new phone and am still navigating it so it could be on my end. Should I enable a desktop mode? I’ve searched all around this site and cannot find how to post a new topic. Thanks! On the home/board index page, click on the appropria...