Search found 7286 matches
- Tue Apr 16, 2024 7:07 am
- Forum: Tercel 4WD Repair Questions
- Topic: Sputters or dies after running a while.
- Replies: 18
- Views: 697
Re: Sputters or dies after running a while.
I don't believe the higher fuel pressure would cause damage to the carb, I think it would just cause it to flood or run rich at times. I never ran into that though so I can't say for sure though.
- Mon Apr 15, 2024 4:37 pm
- Forum: Tercel 4WD Repair Questions
- Topic: Sputters or dies after running a while.
- Replies: 18
- Views: 697
Re: Sputters or dies after running a while.
I agree with Mark. To answer the Weber/fuel pump/fuel pressure regulator questions, yes the Weber uses the stock fuel pump but it does require a FPR because the stock pump puts out a pressure of 5-6 psi and the weber likes 2-3 psi, IIRC. Mogordo if that's something you're going to look into you shou...
- Wed Apr 10, 2024 8:10 pm
- Forum: General
- Topic: Looking to buy a Tercel
- Replies: 4
- Views: 5365
Re: Looking to buy a Tercel
Welcome to the forum, BigMike. This post was made over a year ago, and the user hasn't logged in here in 11 months. You might want to send him an email or private message as some members don't receive notifications of replies to their posts. Just click on 'contact' by the users info on the right. Go...
- Mon Apr 08, 2024 2:55 pm
- Forum: General
- Topic: Reconnecting here
- Replies: 2
- Views: 251
Re: Reconnecting here
Welcome back! What was your user name here before? I'm not sure if you can post videos here -- for photos, you scroll down below the text field, click 'attachments,' click 'add files' and do that, then click 'place inline' to put them in your post. But I don't know if that works for videos, I think ...
- Sun Apr 07, 2024 10:37 pm
- Forum: Tercel 4WD Repair Questions
- Topic: '83 3A hoses question
- Replies: 8
- Views: 458
Re: '83 3A hoses question
Welcome to the forum, desertrat. I love the user name, btw. Great imagery. That rear hose on the valve cover goes to the HIC (hot idle compensation) which does two things. It controls the air-fuel mixture, and also directs vacuum to a flap that controls whether the air intake is sucking warm or cold...
- Sat Apr 06, 2024 1:24 pm
- Forum: Tercel 4WD Repair Questions
- Topic: my old nemesis: another gummed up distributor
- Replies: 5
- Views: 366
Re: my old nemesis: another gummed up distributor
I never gave this much thought before I saw this post. I think I'll pull the rotor off and take a peek behind the grease stopper. As long as you can rotate the rotor counter clockwise a little bit and it snaps back to position, it's ok. And unfortunately even once you remove the grease stopper and ...
- Fri Apr 05, 2024 11:46 am
- Forum: Tercel 4WD Repair Questions
- Topic: my old nemesis: another gummed up distributor
- Replies: 5
- Views: 366
Re: my old nemesis: another gummed up distributor
David, it is considered normal maintenance to re-grease the mechanical advance as part of a tune up procedure. if it is kept moving freely with penetrating oil, and an occasional clean and grease refresh, it should never get stuck like yours. I believe this is in the FSM as part of a regular servic...
- Thu Apr 04, 2024 4:37 pm
- Forum: Tercel 4WD Repair Questions
- Topic: failed brake caliper piston seal
- Replies: 0
- Views: 327
failed brake caliper piston seal
About a year ago I replaced all the brake stuff on my current Tercel. I can't remember if the car came with new calipers or I bought them myself but anyway, they were new or remanufactured. I put them on and all seemed fine. Then recently I was driving to work when the brake light came on and stayed...
- Thu Apr 04, 2024 9:21 am
- Forum: Tercel 4WD Repair Questions
- Topic: my old nemesis: another gummed up distributor
- Replies: 5
- Views: 366
my old nemesis: another gummed up distributor
For the third time in my life, I have run into a stuck mechanical advance on a Tercel distributor. This one was working fine when I did a bunch of work on the car about a year ago (I have always checked for spring-loaded advance on them since my first experience with this) but over time I started no...
- Tue Apr 02, 2024 2:03 pm
- Forum: General
- Topic: Won't start after sitting a few days?
- Replies: 2
- Views: 320
Re: Won't start after sitting a few days?
Once you get it going with starting fluid, does it run ok then? If so, I'm inclined to agree with SirFoxx that it's fuel delivery related. When's the last time you changed the fuel filter?
- Fri Mar 15, 2024 6:52 am
- Forum: Tercel 4WD Repair Questions
- Topic: Bolt ID Question
- Replies: 11
- Views: 1148
Re: Bolt ID Question
Years ago, I bought a six-point (rather than the more common 12 point) socket just for this job. No problems since. I think it was Tom here who ground his 6-point socket down so there was no chamfer on it, just because the fill plugs are so short. I've never needed to go that far but I've always re...
- Thu Mar 14, 2024 9:49 pm
- Forum: Tercel 4WD Repair Questions
- Topic: Bolt ID Question
- Replies: 11
- Views: 1148
Re: Bolt ID Question
So this has happened to me before and today it happened again. I was replacing the torn CV axle boots on my drive axles on my '81 Tercel and I decided to change the gear oil in the differential. I tried to take the filling plug out using a pipe extension on my socket wrench and a hammer, but as usu...
- Thu Feb 29, 2024 8:07 am
- Forum: Tercel Gallery and Projects
- Topic: New member and more importantly car in Australia
- Replies: 2
- Views: 951
Re: New member and more importantly car in Australia
Welcome to the forum, CrownDeluxe! I hope you get around to posting pics of your car, the Aussie models always seemed to have more cool options than the North American models did.
- Tue Feb 27, 2024 5:27 pm
- Forum: Tercel 4WD Parts: New and Used
- Topic: 85 SR5 3ac cylinder head, possibly passenger fender
- Replies: 3
- Views: 733
Re: 85 SR5 3ac cylinder head, possibly passenger fender
Welcome to the forum, Bugalona. I prefer this place for getting good technical advice from serious Tercel enthusiasts, but the Facebook group is a better resource for parts hunting because it's much more active, with many more members. So if you're on fb I would ask there. Good luck!
- Mon Feb 19, 2024 7:39 pm
- Forum: Tercel 4WD Parts: New and Used
- Topic: 1985 tercel windshield BC Canada
- Replies: 2
- Views: 1071
Re: 1985 tercel windshield BC Canada
I'm in BC too. I looked all across Canada last year with little luck, and the few places I found that had them wouldn't ship them. In the end I found a place in Washington state that had them so I drove down and bought one, then brought it home and had it installed here (if my windshield frame wasn'...