Tercel4WD.com

I dont know about your carb wires but mine are cut with male /female connectors and sometimes I mix up the two solenoid wires .another time it ran like you say and one of the wires had broken reconnected and ran better

Thank you petros .will do

Uncomfortable amount of play in the steering wheel . I can go almost a quarter of the turn of the steering wheel before I get a resoonse.oh yeah 83 sr5

I knowcif the exhaust pipe is pulled too close to the drive shaft or is it a propeller shaft ? Anyways the spinning round shaft that is connected to the rear diff .if its too close to that it will vibrate .

viewtopic.php?t=9786&start=45
Learn from my mistakes .the lessons are free

Hey guys remember the nightmare radiator episode I had a year or two back https://tercel4wd.com/forums/viewtopic.php?t=9786&start=45 It went out not to long ago couldnt figure out the problem i so I just mounted a manual switch .and while I was at it since tbe key cylinder housing was worn so ba...

]I had the same problem.once i tapped on the switches with a screwdriver handle and it helped .another time I just unplugged tbe green one for a while until started cycling agsin, then i plugged it back in and not a problem since

Have you taken the cap off the ecbv unit and cleaned the filter(s) and checked for air flow ?

Petros wrote: ↑Mon May 28, 2018 9:06 am Mine is strictly on a low carb diet, keto: high protein and oils. Don't want it gaining weight in its old age.

You must have the California model

ARCHINSTL wrote: ↑Sun May 27, 2018 11:49 pm HAW!
But I am keeping this from my Goldie - I do not want her to develop a sweet tooth at nearly 35!
Tom M.

Or a mind of its own for that matter once they get a taste of the attention acting up and throwing a fit gets them its over spare the rods spoil the tercel

Mattel wrote: ↑Mon May 28, 2018 4:26 pm Synthetic or Mineral Gummi Bears?

Regular

Hello everybody .as most of you know that each tercel is its own entity .and i think I have broke the language barrier .its was when I was saying distasteful things at her. She decided to give me some flatspots during acceleration.as I pulled into the service station to pop the hood and tickle her g...

Throttle cable too tight? The vac operated throttle positioner on front of carb screw not backed off enough? Recenty i have had trouble with old carbs hanging up. If i push the thottle lever down manually i get low idle. For some reason it hangs up. I added a spring to the spot where the auto trans...

Thats what I thought aboutbthe throttle positioner cause when i had the catb out with tbe valve /head gasket job I made sure to back it off .and are you supposed to wait to the engine is cold to retorque the head bolts

Hello ?..............(. *Crickets)