Tercel4WD.com

Not my ad. https://www.facebook.com/groups/4wdabcbuysell/permalink/902216029938390/?sale_post_id=902216029938390 - 5 inch lift in the front, 4 inch lift in the rear ( :o ) - welded rear differential - 8100 Lumen spot lamps x2( can be negotiated) - custom adjustable front camber plates to correct fro...

I like the cop car looking hubcaps.

I had a glasspack on a 4Runner I used to own. It sounded good, but I’ll probably keep this one quiet. So long as I’m spending money fixing it up, I just want to pick all the low hanging fruit I can. If there’s no real benefit however, then I won’t bother. Usually the general consensus is that with ...

Well, it's officially a sticky now, I hope this thread will help someone else later down the road!

Maybe another forum member can make "The Definitive List of Ways to Slam a Tercel 4wd."

I put a $30 cherry bomb on mine, and I think it feels faster. Might be just a placebo effect though.

This topic comes up frequently, and many of the original threads regarding it have become polluted with too much unrelated information. Hopefully this thread becomes a sticky. This thread is not a how-to guide, rather a list of ways to lift a tercel, and the approximate lift gained by each method. I...

jimcrazy wrote: ↑Sun Feb 18, 2018 3:16 pm you can lift it how ever you want,,i only about 1" lift so I took the easy route,, the air shocks and 1" strut spacers in the front and the bigger tires it can all be done in a Saturday morning

Where can I get me a set of those?

you can also get a 12 volt compressor so you can gain lift from the drivers seat by flipping a switch. Mazda MPV with the load levelor option, Cadillac, Lincolns and Mercedes (and others) all use the same compressor (made in USA), you can buy them in the wrecking yard cheap (I paid I think $12 from...

If you would like to compile the lift threads into one that would be awesome. We are all volunteers here. As I search for the holy grail, I'll try and take own notes. No promises, but I may be able to scrape something together. To start with, about how many different ways should I be aware of? Ther...

Have these on my corolla 4wd which has the same rear end as the Tercel 4wd. They work really well with the worn springs that are on there already and compensate well for any loads. I think I've written about them here a few times. Do a search for Monroe yes it does,pic is at 30 psi and 195-70-14 ti...

lowbuck, I am working with a guy that does vinyl vehicle wraps. I specifically looked for one who did RV style striping as I figure that is most similar. That orange would be out of this world if you pull it off! Where did you get that side view tercel image? If I had a similar photo without the st...

jimcrazy wrote: ↑Sun Feb 18, 2018 11:55 am just bolt them on and run the air lines

Do they provide a lift?

Anyone used these? A fellow on another forum says that they bolt right in. I think its on page 2. https://grassrootsmotorsports.com/forum/build-projects-and-project-cars/mr-t-1985-toyota-tercel-4wd-sr5/133791/page1/ $60 CAD on rock auto for 2 http://www.rockauto.com/en/parts/monroe,MA700,shock+absor...

Attached mock up of new side graphics will include a stripe down the c-pilar with "Tercel" under the rear window and the 4WD logo in that back square. Where can you get custom graphics made? I'm thinking something like this for Jenny: https://i.pinimg.com/564x/09/52/db/0952db80654fe69c43f...

waynehoc wrote: ↑Sat Feb 17, 2018 2:40 pm $50 sound okay to you? Includes short block and head (head still bolted to the block), with oil pan and valve cover

The soonest I would be down is easter, I will contact you closer to the date, if that sounds good.