Tercel4WD.com

I'll have the drivers and passeger seat belts. I'm swapping them out. The plastic support at the base are shattered however from getting crispy in the Nevada sun. I'll also have a brown center console. Mine's an 83. There's an 87 in my local scrap yard if they haven't crushed it. I may be able to pu...

Good tip on the Bondo. I'm going to have to try that. My front bumper is dented in on the right side and the rubber won't bend back and I have a crack on the top of the rear. I got some rubber diamond plate strips that I'll put on after I seal it too. Paint as well.

Black or chrome?

Ty! I have your guide printed and ready for the mechanic!

Did you ever find that tan window crank? I'm swapping out my interior and I've got 3.

Thanks for the welcome! Yeah, It was quite the adventure driving it up from Texas on a bad head gasket, spiderwebed windshield and no heat. I lost my brakes in Ohio. Some knucklehead left a bolt clanging around in the wheel and it took out the brake cylinder. This baby is completely rust free, even ...

Ok! Thanks for the reply!

I would like to attempt lift #5 and have a question. I already have the strut mounts but the bolts are not long enough to accommodate a one inch spacer. That is where it goes right? What was done with the one in the picture?

OK! Sorry, I didn't get a notification of these replies and things have been hectic with the new to me Tercel. I will get scanning.

Picked up the one in Lubbock. Rust free!

I just received a Repair Manual and an Owner's Manual for the 1983 4WD from a kind elderly gentleman. I'm thinking about removing the binding and running it through my sheet-fed scanner. Is there any interest out there? In the mean time if anyone needs reference on a specific repair I could share a ...