Tercel4WD.com

I just watched someone loose their drive line on the way home in a ford expedition. Kinda wished I could help them with my T4 but I knew it was too underpowered to push him even a few feet into a parking space. My catalytic converter heat shroud tore off when I was up in oregon, all I can gather is ...

So I've decided on a right hand A pillar triple pod http://ecx.images-amazon.com/images/I/41dNItdDi-L._SX425_.jpg http://www.amazon.com/KingSo-Black-Pillar-Triple-Holder/dp/B00PRMDPWQ/ref=sr_1_7?s=automotive&ie=UTF8&qid=1428223063&sr=1-7&keywords=Right+Hand+Drive+Gauge+A+Pillar+Pod I...

Do we got a link or part number for this clutch cable? After I had the gearbox down last year and found a healthy clutch disk I'm ready to believe to within $30 - $70 thats my problem with Kodama. Also one of these days I'm gonna have to get bold and take its original transmission apart and see if t...

emmahumpfritter wrote:The Ford Festiva doubles as both birth control and shallow female repellent.

ROFL!

Yea I've never used antiseize on plugs, never had a stuck plug in 50+ cars I pulled plugs from - even old flat heads from rusted old equipment.

I feel your pain bro, When my radiator went south I kept hearing words from posts in this forum about even slight overheating causing the head gasket to pop, I literally started the car just to floor it and get to cruising speed, cut the engine, coast till momentum was lost, wait till pressure drops...

I used to have a pair of these I put in a 89 volvo 740

Those 740 models are the worst for locations to mount a drink holder

I can dig through my tranny in the bucket and find these parts - if yours is damaged somehow I can ship to you, this gearbox was just run low on oil or a bearing went south, so rear internals are probably fine.
Tl;Dr I'd like to help.

Why is that car in 4WD?

hmm, when I was disassembling a tranny with a eaten input idler gear I notices many of these such plugs that when they came out have springs keeping ball bearings in place, I believe most were associated with the shift shafts. But there was other stuff that these "plug" things were doing a...

Its is an 88 year, but it is all 87 parts, its a december NUMMI car, damn headlights are the 9004 and lots of older parts.
It may have a OBD port for a jumper situation as described in the haynes, but I've not looked for the pigtail yet.

Right, I just think that maybe where the seat back hinges against the seat bottom that there may be chafe from a zip tie knot that could damage the seat bottom over time - if, as it were, there was enough reclining action over a long enough time line. This thread makes me happy, I wetted, scrubbed a...

Know its an old thread but this is of interest to me, can anybody see any reason not to use zip ties?

Is it the same block?
Like could I stick it in my tercel if I had/wanted to?
Just a purely hypothetical question.

Totally messed up, its got a 4A-LC