Tercel4WD.com

the longer one actually holds part of the shift linkage in place, DO NOT REMOVE IT, when changing the oil So that's what it's for! My trans is out right now as I'm replacing all the seals, clutch, plugs, etc. while I'm doing the 7AGE swap and removed all the 24mm plugs one at a time to see which co...

Nice find and suggestions! Thanks! There are two 24mm on the diff, two 24mm on the trans as drains, and either three or four 24mm on the sides of the trans as fill or other checks. I say "three or four" on the sides of the trans because there is on on top of the trans that holds down a sp...

The 24mm low profile drain plugs are known to be easily marred/stripped when attempting to remove, later model Toyotas use the same plug threads only in an internal hex (allen) plug. These are the Toyota part numbers for longer magnetic plugs for drains and shorter non-magnetic plugs for side/fill. ...

The thread you're replying to is over a year old. The user hasn't been active since less than a month after the post was made.

EDIT: If you want something done, you gotta do it yourself. Did you ask him directly? I actually happen to be the proud new owner of both of LeeBiews tercs as of earlier this year so I could probably confirm what are on it! I did not, I went searching and found them by process of elimination. The t...

Last I talked to him was in December, and he's still been driving it... Did you try just straight asking him "What calipers are you using?" EDIT: If you want something done, you gotta do it yourself. The calipers are off of the 1988-1989 ST165 Celica GT-Four/All-Trac (US)/Turbo 4WD (Canad...

Haven't been on the FB group page for a minute, did you ever find someone to test these?

WOWZA! That's definitely the motherload of bushings lol... Have you gotten around to installing them all? I haven't gotten around to installing any of them. Between one set needing to be made, shipping times from AUS, and COVID popping up they didn't get here until Texas began it's non-stop 100+F d...

SuperPro has a US-based arm as well. www.SuperproUSA.com While true, this is the list of parts for my '83 on the USA site: https://superprousa.com/collections/all/1983-toyota-tercel-dlx-esi1005447 And this is the list on the AUS site: https://superpro.com.au/find/superpro-suspension-parts-and-poly-...

Super Pro Front Sway Bar Mount Bushing Kit While driving around town I noticed that there was be a loud metal-on-metal sound while going through large dips. I pulled over and took a look under the car and immediately noticed that my sway bar bushings were shot. OEM bushings were out of the question...

While I haven't installed my lift yet as I am in the midst of a 7AGE swap, I bought ACDelco brand since I couldn't find Moog either. If you're insistent on Moog, try ordering them from Summit Racing. I've ordered some rare OEM replacement parts from them and while they took awhile not being in stock...

Only 123k on the clock and by the look of everything but the body likely mechanically sound. As an 83 owner I want pretty much everything from the transmission back, but the quote about it being photographed last winter tells me it's all gone.

Not that I'm in the area anyway...

The outers are just marked power or not, while the inners are the only ones listed with length.

I completely read that backwards... Thanks Petros (and Yaut)!