Search found 171 matches

by JDNightFox
Fri May 24, 2019 11:15 pm
Forum: Tercel Gallery and Projects
Topic: Corolla brake upgrade
Replies: 18
Views: 11247

Re: Corolla brake upgrade

Just did a dry install and my 14” steel wheels do not clear them, so I will need to get some 15” rims eventually

Everything else worked flawlessly. I used a wrench to bend the dust shield back enough so it can still shield but clear the larger rotor
by JDNightFox
Thu Apr 18, 2019 1:16 pm
Forum: Tercel Gallery and Projects
Topic: Corolla brake upgrade
Replies: 18
Views: 11247

Re: Corolla brake upgrade

Speaking of which, I have 14” steel wheels currently, Will this all clear? I was going to buy 15” alloys eventually when I got new tires
by JDNightFox
Thu Apr 18, 2019 12:52 pm
Forum: Tercel Gallery and Projects
Topic: Corolla brake upgrade
Replies: 18
Views: 11247

Re: Corolla brake upgrade

One of my calipers is going out so I’m going to do the front caliper conversion on mine. I’ll let you all know how it goes but does anyone want my drilled, slotted, plated rotors and ceramic pads off this current setup?

Will sell for cost of shipping + $10 since they have maybe 1000 miles on them
by JDNightFox
Wed Jan 02, 2019 2:46 pm
Forum: Tercel 4WD Repair Questions
Topic: Transmission stuck
Replies: 10
Views: 2201

Re: Transmission stuck

Well I have driven through deep water so maybe it has leaked in

I disassembled my trans so I know what they mean when they say the compartment is separate (very weird though)

Mine was dry and full of graphite powder when I removed the top to it. But I guess I need a new shift boot
by JDNightFox
Wed Jan 02, 2019 12:50 pm
Forum: Tercel 4WD Repair Questions
Topic: Transmission stuck
Replies: 10
Views: 2201

Re: Transmission stuck

Haha thanks guys I replaced all the seals on it and have only put about 3000 miles on it since I did that in 2015, I do keep it outside though and I’m pretty sure the shift boot was replaced too It has all new oil in it but would the water have gotten in to the actual shifter column? The shift bushi...
by JDNightFox
Wed Jan 02, 2019 6:54 am
Forum: Tercel 4WD Repair Questions
Topic: Transmission stuck
Replies: 10
Views: 2201

Transmission stuck

I parked my car on Wednesday when I left for Arizona and I came back to below freezing temps here. I left it in first gear and when I went to leave for work this morning it’s stuck in first

is that just because of the low temps? I had to take my other car and driving it around slowly didn’t fix it
by JDNightFox
Wed Jan 02, 2019 6:52 am
Forum: Part Numbers - OE and Aftermarket
Topic: Front / rear axle diff gaskets
Replies: 4
Views: 8424

Re: Front / rear axle diff gaskets

front and rear gaskets for the diff are not the same at all. front has a cover, on an alloy case with an irregular shape. rear is the third member assembly that bolts to a stamped metal housing with a round shape. I would be surprised if you can find them new. you may have to make them, or revert t...
by JDNightFox
Tue Dec 25, 2018 3:48 pm
Forum: Part Numbers - OE and Aftermarket
Topic: Fuel sending unit
Replies: 0
Views: 6345

Fuel sending unit

So I came across this today

https://www.alibaba.com/product-detail/ ... 49628.html

It says it's for our year range, I'm not sure of the price but you will probably have to order in bulk to get a good price on them

This is for Toyota OEM part number 83320-19875
by JDNightFox
Sun Dec 23, 2018 6:52 am
Forum: Tercel 4WD Repair Questions
Topic: Setting the timing
Replies: 8
Views: 1983

Re: Setting the timing

No it’s the original carb

And nevermind, I recalculated with the actual distance and it's 18.5mpg highway
by JDNightFox
Sat Dec 22, 2018 5:37 pm
Forum: Tercel 4WD Repair Questions
Topic: CV axle interior bearings
Replies: 15
Views: 3616

Re: CV axle interior bearings

yes,the axles measures .985 or 25mm where it runs in the diff,my old one measured .996 out close to the seal and .988 back in further,,,i measured a few diffs i have and the one i used was .987 a lot tighter and not much movement with the axle installed Yeah I might just need to get some new CV's t...
by JDNightFox
Sat Dec 22, 2018 5:13 pm
Forum: Tercel 4WD Repair Questions
Topic: CV axle interior bearings
Replies: 15
Views: 3616

Re: CV axle interior bearings

jimcrazy wrote: Sat Dec 22, 2018 4:58 pm just did a quick search on a few toyota parts site and says discontinued part,,will pull the bearings and see if they cross over to a timken number
So our main concern is if the carrier diameter matches the CV shaft diameter to prevent any looseness?
by JDNightFox
Sat Dec 22, 2018 4:19 pm
Forum: Tercel 4WD Repair Questions
Topic: CV axle interior bearings
Replies: 15
Views: 3616

Re: CV axle interior bearings

jimcrazy wrote: Sat Dec 22, 2018 3:56 pm mine was not leaking but a had a small vibration that came and went when the axle would get whipping around
Yeah I guess so. I found the part number for it at least, 90366-35002
by JDNightFox
Sat Dec 22, 2018 3:45 pm
Forum: Part Numbers - OE and Aftermarket
Topic: Front / rear axle diff gaskets
Replies: 4
Views: 8424

Front / rear axle diff gaskets

Has someone found part numbers for the front and rear differential gaskets? I need to pull my rear axle and I would like to put an actual gasket on it. So far I found these: https://www.carid.com/fel-pro/differential-cover-gasket-mpn-rds27411.html?singleid=1208245125&url=93622014 for the rear ax...
by JDNightFox
Sat Dec 22, 2018 3:42 pm
Forum: Tercel 4WD Repair Questions
Topic: CV axle interior bearings
Replies: 15
Views: 3616

Re: CV axle interior bearings

there is no bearing to support the axle,it runs in the carrier housing,i replaced the crown gear and carrier in mine last summer you could wiggle the axle around and the hole were the axle goes in was worn about .01 larger out close to the seal,the tapered bearings inside support the carrier housin...
by JDNightFox
Sat Dec 22, 2018 2:47 pm
Forum: Tercel 4WD Repair Questions
Topic: CV axle interior bearings
Replies: 15
Views: 3616

CV axle interior bearings

Has anyone thought about replacing the bearings that contact the cv axle inside the hub? I was talking to one of my friends a while ago and he has the same issue we have with replacing the CV axle seals and it still leaking, so he checked the bearings and found they were worn and allowing the axle t...