Tercel4WD.com

Just letting y'all know that I ended up buying this thing. It was a birthday gift to myself lol... The lot listing said "runs and drives" we'll see how much of that is true. Ideally it makes it all the way down to SoCal. Pray for me boys 🙏 Yay! How much did you pay for it (before and afte...

FYI this one has been given another auction date of 10/22/2019 at 02:00 pm CDT.

FYI either it didn't sell the first time or the auction was cancelled for some reason, it's still available and listed with a "future" date for the auction. Also in Oregon you don't need a dealer/business license. Anyone can buy any vehicle from Copart in Oregon. Which is better than we ha...

Short notice, goes up for auction in about 7 hours: https://www.copart.com/lot/49248859

Exterior is beat up, but engine bay and interior look to be in good condition and all there.

Not a lot to report so far, been nothing but 100+F days around here. Engine is out of the truck and on the engine stand, have added freeze plugs to the shopping list as the engine seller popped holes in several to get all the fluids out before shipping. It's dirty, but nothing some degreaser and my ...

I think having rear disks would be great, but unless there is an adapter kit, it looks like too much work to make it work on your own. typically there is a lot of trial and error, making spacers and brackets, etc so it all works together, and than dialing in front to rear bias with a propositioning...

Heh, I happen to have one of those prop valves on the shelf for this exact project ;) I've been thinking about finding a 4AGE head to swap onto my 4AFE, I used the generic style 4AF/4AG style pistons when I rebuilt the bottom end so I think I can just make the swap. The 4AFE is a significant improv...

Very interested in where this project goes! Lifting information can be found here: https://tercel4wd.com/forums/viewtopic.php?f=2&t=13106 One of the many bookmarks! I'm likely to go with the Abra-Cadaver lift as it sits well, uses all new parts, and the CVs should be put at a better angle after...

sounds like a great way to up grade the Tecel4wd. what you are building is called a "7AGE" over on the 4age forum, you have to use a different timing belt and a few other minor parts to get it all to work together. you can also cut down the 4age flywheel so you can put on the Tercel ring ...

So about 18 months ago I picked up a running, driving, small rust spots on the outside, but immaculate interior, white SR5 with about 300k on the clock for the low low price of "come pick it up and it's yours." Between picking it up and when it was parked, I sold off a couple of commuter c...

The Professor wrote: ↑Wed Aug 21, 2019 7:50 am

AugustusFerdinand wrote: ↑Tue Aug 20, 2019 3:15 pmAny progress?

The OP hasn't logged in since the end of January 2019. We may never see this project finished...

Oh well, guess I'll have to be the one with a 7AG build. About to toss up my build thread as the 7A arrived yesterday along with many other parts.

Any progress?

Also I assume you meant you're using 4AG smallport pistons on the 7A rods as everything I've seen says the bigport pistons are 18mm wrist pins while the 7A and smallport use 20mm wrist pins.

Thanks for posting this. Awaiting the verification email to ask for parts.

No transmission info on their or the yard's site... Might try calling tomorrow to see if they know if it's manual or not. Always a good idea to have a spare.

My stupid computer does not allow me to contact those sites for some reason wish I could view them Has nothing to do with your computer and everything to do with the fact that the the newest link is over a decade old. The internet is not kind with keeping thing for a long time, let alone forever. O...

Mattel wrote: ↑Thu Nov 30, 2017 2:51 pm Like I said. I'm happy to do the artwork (Previously a graphic designer in branding) and you could send/take the artwork file to your nearest sign shop.

I've got a small mom and pop sign shop and vinyl cutter that could turn these out for the community.