Tercel4WD.com

What is the control arm hardware mod for? The bolts for the control arms thread into a captive nut that cannot be accessed without some serious messing around. Occasionally, due to corrosion between the bolt and nut, the welds on the captive nuts can break when trying to remove the bolt and now you...

Have a 3A engine(orig that I removed with 195k and running fine), gas tank and many parts (not the tranny tho) available. See pics for items. Would like to sell as a lot for $450 and buyer pays shipping from northern NY I removed these working parts because I converted her to electric earlier this ...

Found this video which describes it as a loose pinion nut https://www.youtube.com/watch?v=CvmZ1xNTzAE&ab_channel=TomMorton Wow, neat video. I've never heard or seen anything like that before. If this is indeed the same problem as you are having, I wonder what caused it to happen. Like I mention...

Esaus, what are the noises you hear on deceleration when in 2wd?

I honestly can't recall anyone here having a rear diff go bad on them. The closest I can think of to that is mixing gear ratios when replacing the trans but that doesn't sound like your issue. Did it have a leak and run out of gear oil?

Hi Frank. Your post isn't very clear -- it sounds like you're saying your car used to have a cold starting issue, but now it won't start or run at all without pouring gas down the carb. Do I have that correct? If I have that right, my first question is when did you last replace the fuel filter? Unle...

What was wrong with the clutch installation? Did you get it sorted out?

Darn, looks quite nice. Good luck with the sale.

I agree with Jarf, most of what you describe is normal for carbs. You have to step on the gas at least once to set the choke when it's cold, and once it's warmed up you shouldn't have to do that to start it. There is a section in the owner's manual that covers this stuff. The only thing that stands ...

Welcome to the forum, aslich713. You should definitely inspect the park brake for function, and the rear brakes overall. I would engage the park brake and jack the back end up and look at spot just underneath where the park brake handle is. There is a metal bar there that that the two park brake cab...

Wowee, you've put a ton of work into it! Very nice to see.

What are the sizes on tires in the pics?

If you look at the rear of the carb you will see a cam with steps in it. These steps control how much throttle is automatically given at idle while the engine warms up. If things are not set correctly, you can end up starting with not enough throttle, or with the opposite problem where the engine is...

SirFoxx wrote: ↑Wed Oct 18, 2023 1:23 pm the ports are in a lousy spot as the first gens use an external coil style dizzy.

Oh, is the vac advance unit on the top of those distributors? I think I remember seeing that once.

Wow, it sold for $10,250...in USD! I had assumed it was in CAD since the car is in Canada but nope. So in Canadian, that's over $14k. I hope the buyer is someone who has lots of disposable money and isn't putting themselves into debt for what they believe is going to be a mint car that won't require...

I bought a replacement vacuum advance unit off of ebay recently, even though I wasn't sure if it would fit on our cars (the listing said it was only for 1982 tercels, which didn't make any sense to me but still had me unsure about forking over so much cash for it). It arrived yesterday and I install...

Where are you located, Rex?