Search found 2120 matches
- Thu Jan 19, 2023 9:18 pm
- Forum: General
- Topic: Oil drain plug gasket
- Replies: 22
- Views: 6896
Re: Oil drain plug gasket
I attached a picture. Look at right side centered between two spot welds. That is a divot. Under divot is a square notch in the threads to allow every last drop of oil to drain. If you look closly you can make out the square hole. If sheetmetal gets bumped there it will deform the metal and no matte...
- Sun Jan 08, 2023 5:05 pm
- Forum: Tercel 4WD Repair Questions
- Topic: 3D printed Synchros?
- Replies: 14
- Views: 2509
Re: 3D printed Synchros?
1st/2nd have same size synchros (largest dia)
3rd/4th have same size synchros. (Mid size dia)
5th/granny have same size synchros (smallest dia),
I have quite a few very good used small ones if anyone needs one
I have some used large and mid but they are worn but usable (better than nothing)
3rd/4th have same size synchros. (Mid size dia)
5th/granny have same size synchros (smallest dia),
I have quite a few very good used small ones if anyone needs one
I have some used large and mid but they are worn but usable (better than nothing)
- Wed Jan 04, 2023 9:55 pm
- Forum: Tercel 4WD Repair Questions
- Topic: 3D printed Synchros?
- Replies: 14
- Views: 2509
Re: 3D printed Synchros?
The place i found was in india. I sent them a used sample. The cost per synchro was very reasonable but you had to order several hundred to make it worth it to them. Something like 900 bucks worth of them.
- Wed Jan 04, 2023 9:45 pm
- Forum: General
- Topic: I need to ship a transmission.
- Replies: 3
- Views: 1211
Re: I need to ship a transmission.
I hear fastenall does third party shipping
I shipped one from Washington state to los angeles once for 104 bucks at UPS.
I shipped one from Washington state to los angeles once for 104 bucks at UPS.
- Sun Dec 11, 2022 3:15 pm
- Forum: Tercel 4WD Repair Questions
- Topic: JET - 2-way filter/valve??
- Replies: 10
- Views: 1500
Re: JET - 2-way filter/valve??
It takes a hard blow to move air thru that one. It may be moving air but you cannot tell. I usually remove it and plug the hose.
- Sun Dec 11, 2022 3:11 pm
- Forum: Tercel 4WD Repair Questions
- Topic: Radiator blew/ engine ran really hot
- Replies: 6
- Views: 1380
Re: Radiator blew/ engine ran really hot
I got my engine pretty hot once. Maybe not as hot as yours. I re torqued the head. That was three years ago. So far so good.
- Sun Dec 11, 2022 3:07 pm
- Forum: Tercel 4WD Repair Questions
- Topic: Drum brake help
- Replies: 8
- Views: 1602
Re: Drum brake help
I am wondering if master cylinder was not bench bled. Or not bench bled properly. Or bench bled improperly and is now damaged
- Sun Dec 11, 2022 2:59 pm
- Forum: Tercel 4WD Repair Questions
- Topic: 84 rod bearings
- Replies: 21
- Views: 8695
Re: 84 rod bearings
Seems like if the bearings are not STD they would be marked with something like maybe how much they are oversized.
If used bearings look good and are within tolerance (per plastigage) why not re-use them.
If used bearings look good and are within tolerance (per plastigage) why not re-use them.
- Tue Nov 22, 2022 11:55 pm
- Forum: Tercel 4WD Repair Questions
- Topic: Stock vs. Weber
- Replies: 31
- Views: 3820
Re: Stock vs. Weber
Stock carb keeps rpms up while shifting for less gear grind
Stock carb gets 30 mpg for all around driving (stock tire size)of
Stock carb gets 30 mpg for all around driving (stock tire size)of
- Sat Oct 01, 2022 6:09 pm
- Forum: Tercel 4WD Repair Questions
- Topic: Charge and brake light on still after replacing alternator & voltage regulator
- Replies: 9
- Views: 1528
Re: Charge and brake light on still after replacing alternator & voltage regulator
Though not quite the same it may be worth mentioning
I once installed an external regulator alternator in an internal regulator car.
It was an accident but the plug did plug in even though it was different.
Took a while to figure out what i did
I once installed an external regulator alternator in an internal regulator car.
It was an accident but the plug did plug in even though it was different.
Took a while to figure out what i did
- Tue Sep 27, 2022 9:40 pm
- Forum: Tercel 4WD Repair Questions
- Topic: convert auto trans to manual?
- Replies: 20
- Views: 4710
Re: convert auto trans to manual?
The only hole you should have to make is for clutch cable thru firewall . The brake and clutch pedal mountholes should be there
- Mon Sep 19, 2022 10:15 am
- Forum: Tercel 4WD Repair Questions
- Topic: clutch installation questions
- Replies: 8
- Views: 1066
Re: clutch installation questions
I tap the pilot bearing in with a socket just slightly smaller in diameter. Note the depth and make sure its is installed to depth.
The throw out bearing: i use a vise and a socket to press it on.
The throw out bearing: i use a vise and a socket to press it on.
- Fri Aug 19, 2022 10:26 am
- Forum: Tercel 4WD Parts: New and Used
- Topic: I Need A Rear Diff
- Replies: 14
- Views: 1590
Re: I Need A Rear Diff
Did you find a 3.73 diff yet? I may have an extra one. I am away from home but can check sunday.
- Fri Aug 19, 2022 10:24 am
- Forum: Tercel 4WD Parts: New and Used
- Topic: I Need A Rear Diff
- Replies: 14
- Views: 1590
Re: I Need A Rear Diff
I have swapped quite a few tercel rear diffs. Doing the whole axle is not something i would do.
- Fri Aug 19, 2022 10:08 am
- Forum: Tercel 4WD Repair Questions
- Topic: Erratic Idle - If it Idles at All
- Replies: 16
- Views: 1785
Re: Erratic Idle - If it Idles at All
When idle is high try pushing throttle cable cam down. If idle drops i would suspect the brass butterfly is hanging up due to wear on forward side (usually) This is pretty common. I add a spring to pull it the rest of the way down.