Tercel4WD.com

This tank is no longer being manufactured, so finding a new one is a worthwhile investment. Source that it's no longer being made? I picked up a TO1B since I'm doing an EFI conversion and saw reports of the same. Spectra still makes them, but they aren't one that's stocked as much. Had to wait a co...

I think everyone is busy. Looking at the main forum list the last post for several subforums are 19th, 18th, and 15th. So just kinda quiet out here.

Hey, that car isn't in your signature!

Lies!
Deceit!
New server!

It's so new and shiny!

Thanks for the hard work irowiki!

5% Discount Code: 320102EDEFF2A4
Expires: January 5, 2022

From here: viewtopic.php?f=2&t=15647

Now I get to use it to get a small discount on $500 worth of catalytic converter stuff to replace the one on a CR-V that some POS stole this weekend.

5% Discount Code: C5F586000DC0F2
Expires: October 1, 2021

From here: viewtopic.php?f=2&t=15561

Not a whole lot to report just yet as it's been a fight between heat and rain keeping me from most of the outdoor projects. Picked up the material for the permanent spacers along with a few parts I was missing to complete the timing belt and covers install. Need to find my trans mount bolts and carr...

1. Petros: Did you get it?
2. Teranfirbt: RWD or AWD?

That is one sun bleached timing cover! Going to be honest, I kinda like the gray...

Do you have a sandblaster to clean up the rusty parts?

Cool cool. I might consider the chev alternator upgrade whenever I swap over to EFI with this build. My alternator is borderline anemic when I have lights, radio, and accessories going. I'll have to keep up on your build to help get some ideas for a bracket. In other news, I'm going to a junk yard ...

Questions for those using a 4age head. What alternator bracket and belt are you using? I would like to try and retain the alternator I have and just move it. There's a few aftermarket options, but if I use a stock bracket for mounting on the intake side what belt part number would I need? Haven't g...

Appears the actual threads are missing the borders, but they appear if I try to take a screenshot with the Win10 snipping tool, but here's a screenshot with the print screen button. Tried on both Chrome and Firefox. Might just be my computer because I tried on my work PC and seems fine... forums.png...

Nope. And I'm kinda jealous they don't.

The wrist pin is the same situation with the 7AGE build. Bearings are only necessary if the rods are set up for floating pins, since the 4AFE (and 7AFE) rods use press fit pins you just press the pins into the rods like normal, no bearing necessary. Getting the pins in place does not require a press...

The 7A does have one, but I did not use it. I didn't pay it much mind, but I think a cursory look said it wasn't going to fit inside the 3A's pan.