Tercel4WD.com

hello, any chance I could purchase a drivers-side door handle?

I never thought I would see something with a turbo posted on this forum, awesome lol. Supras are still a great tuning platform, thanks to the godly 2jzgte motor. Coupled with the 6speed getrag transmission these cars are made for high speed. Got to love the drone of the fuel pumps, most big HP supra...

I have just book marked this thread, you guys are gods among men.
the inners are my big concern at this point, I like both of your suggestions.. diy tools are awesome
do you have to apply grease at all to the inner joint ?

love the pic of the bush in the back. last spring, a large fir tree fell across our road, just up past our driveway. i put a tarp down in the back of my all trac, grabbed my chain saw and gas, bucked the tree up, threw the wood in the car, and drove it home in 4 loads. i was really proud of using m...

Looks like you got some really nice parts put in to the Terc. Is that a DORMAN regulator for the window? Does it work nicely and built well? I am considering them for my replacement if ever needed...my factory ones are just fine though. Peace Yessir good eye, it is a Dorman regulator Dorman 749-246...

these new shocks are 100% better than my 100% original shocks that were totally blown I also picked up some daisys and a roof rack for ultra cheaps http://exactjdm.com/sr5/sept28-2013/IMG_20130929_120133.jpg http://exactjdm.com/sr5/sept28-2013/IMG_20130929_120147.jpg the 14" miata wheels felt l...

out with the old

in with the new, these are OEM replacement KYBs - $21 a piece on rockauto

I picked up a nicely used gas tank from fellow member c_j, some minty tail lights and other bits n bobs. No pictures on the fuel tank, but I rinsed it out with marine clean, then POR15 the outer shell. New soft hoses were used, this tank should outlast the vehicle. The drivers side window regulator ...

That repainted (powdercoated?) cam cover really looks good! What did you use? Tom M. thanks! it was some type of VHT metallic flake - total spray can job but I was happy with the end result as it worked well and seems to hold up to the heat it was a pretty active summer for the beast, lots of yard ...

The passenger side tie rods are making some horrible clunking noises over bumps, and when I grab the wheel I can move it horizontally. Are any special tools needed for replacing both the inner and outer tie rods on a 4WD Tercel? I picked up left and right inner and outer tie rod ends, so I figure re...

I have an OE bushing list with part numbers in the Part Numbers - OE and Aftermarket Forum: See https://tercel4wd.com/forums/viewtopic.php?f=16&t=6444 Incidentally, you do mean rear shocks and not rear struts , right? Tom M. thanks man yes I meant rear shock. I'm trying to do a slight lift and ...

you can use either the Tercel top mount, or an MR2 front strut top mount without having to drill holes in the strut tower (same bolt pattern, the MR2 top mount is about 12mm less height). I have also used the inexpensive harbor freight spring compressors, I put it in a big vise and make sure the &q...

that 1st gen is really really clean, congrats on acquiring one!
I have the same setup, a tercel wagon (87) and a first gen (81) - your two are in way nicer shape, though

my car is held together by POR15