Tercel4WD.com

Ok, I stand corrected, I googled the Beck Arnley bearing seal set 052-3281 and from vendors other than Rock Auto it clearly shows photos of the set as being 3 pcs. The photo on Rock should be updated. Also after an exchange with Robert I now understand what the bearing is about and please disregard ...

Just checked rockauto website and the Beck Arnley seal kit 052-3281 shown in the video lists only one seal where as the National 5695 appears to be a complete kit?

Thanks for all the replies!! I had actually watched Robert's video a few times before posting. I watched it yet again this morning and it's starting to become clearer. Not trying to be critical, but rather wanting to fully understand the process, there is a area in the video where he is attempting t...

Hello again, this time it’s front wheel bearings. First it appears that two types were available, ATM and Koyo. Does it make a difference which one is used? Also would appreciate a shopping list of all the seals, dust covers and races required to do a complete job. I know if I had it all apart I’d h...

I would first identify which relay it is. Then I would check the fuse or fuses that supply it with power. Then I would also check what switches or sensors that activate this problem some relay.

Yes, my error, they are mounted as you described. My were no match for N.E. road salt.

Hi, ty for the info, though it isn't what I'm looking for. The brake back plate dust shields are mounted on the rotor and made of sheet metal.

Hey, does anyone have a handle on the discontinued front disc brake dust/splash shields?

Hello again, needed to repost this question. I'm wanting to know the correct procedure for removing and re-installing the fuel tank on a 1986 Tercel wagon?

Hello all, looking for some first hand guidance for the fuel tank removal. The other day with a floor jack under the tank I continued applying blaster to the tank straps hinge/pin areas. I removed the left side pin completely, cleaned it to bare metal and applied never seize. Well what a bear trying...

Thanks once again! Now that 2-3 gallons of fuel have been used the leak has stopped. A view of the tank from the front didn't afford the gas pick-up to be seen or its seal. I did observe one of the larger metal line(feed to fuel pump) to have significant rust where it elbows, I started the car and c...

Thank you for the reply! I contacted a Toyota dealer and requested a parts illustration of the tank and related components. One illustration is of the tube system from the engine to the tank, which unclearly shows three pipes going to the tank but doesn't identify which pipes go to which pipe on the...

Thanks, though I all ready did that and the seal is dry. Would like to know how which metal pipes go to which connections on the tank, so when I drop the tank I can check if they are correct?

Hello all, its been a while since I've posted! My 86 wagon after a maximum re-fueling and over flow (oops) seems to have developed a leak appearing to come from the top left back side of the tank. The tank was changed by the previous owner in 2013 with a Spectra TO1A. I have doubts about this tank r...

Hello all, getting hot! I recharged my system approx. 2 years ago and tried it for the first time this season today. As expected it was blowing cool but not really cold. Opened the hood and as expected observed a lot of bubbles in the dryer sight glass. Looking for some first hand, hands on guidance...