Search found 9961 matches

by Petros
Tue Apr 17, 2018 1:42 am
Forum: Tercel 4WD Repair Questions
Topic: New project gone down hill only, bent frame
Replies: 4
Views: 92

Re: New project gone down hill only, bent frame

the cv axle has a large range of plunge, have your tried popping it back in? the cross member may be racked so one end is closer to the front of the car than the other. take some measurements, if so you can likely loosen the bolts and position it back into place. Put penetrating oil on the over nigh...
by Petros
Tue Apr 17, 2018 1:32 am
Forum: Tercel 4WD Repair Questions
Topic: HOW RELIABLE IS THE AC CLUTCH?
Replies: 1
Views: 30

Re: HOW RELIABLE IS THE AC CLUTCH?

the old o-ring seals in the hose connectors are not compatible, so you have to change those out, and the valves are different (not a big deal to change). Usually the clutch is reliable, I would think you could bench test it (see the FSM). it will not engage unless there is pressure in the system, th...
by Petros
Tue Apr 17, 2018 1:25 am
Forum: Off-Topic
Topic: how does cottonwood burn?
Replies: 4
Views: 77

Re: how does cottonwood burn?

not a lot of heat comes out of many "white" woods, alter, aspen and cotton wood. you can burn it, but it takes a lot more to heat the home, so you will be refilling the stove often. You also get a lot more ash out of it because of it. but you will get heat out of as long as it good and dry. If not d...
by Petros
Tue Apr 17, 2018 1:20 am
Forum: General
Topic: What 14" rims fit tercels
Replies: 26
Views: 6152

Re: What 14" rims fit tercels

yes it does, when in 4wd the drive train is locked out and different size tires will but stress on the drivetrain because each wheel will be turning slightly different speed. even if you have one low tire you can feel it bind, and it is almost impossible to get it out of 4wd because of the preload o...
by Petros
Sat Apr 14, 2018 6:48 pm
Forum: Cars for sale
Topic: 1987 Tercel SR5 4x4 Wagon for sale
Replies: 9
Views: 151

Re: 1987 Tercel SR5 4x4 Wagon for sale

replacing tie rod ends or even the lower ball joint is not that much work. replacing bushings in the lower control arms is not a big deal either, at least the outter one. the inner one is a PIA, but usually the inner ones do not go bad as often. none of those repairs sound like a reason to give up o...
by Petros
Sat Apr 14, 2018 5:17 pm
Forum: Cars for sale
Topic: 1987 Tercel SR5 4x4 Wagon for sale
Replies: 9
Views: 151

Re: 1987 Tercel SR5 4x4 Wagon for sale

I could not quite find in all that text exactly what it needs to make it road worthy, care to summarize what repairs it will need?
by Petros
Sat Apr 14, 2018 5:13 pm
Forum: Tercel 4WD Repair Questions
Topic: New project gone down hill only, bent frame
Replies: 4
Views: 92

Re: New project gone down hill only, bent frame

no pictures showed up, but these kind of frame deformation is not fatal, and easy to fix yourself. It should not need any welding, you need to find a way to bend it back without doing more damage. usually using a tow strap, a hand winch (come-a-long) and a big tree or similar anchor, you just find a...
by Petros
Sat Apr 14, 2018 5:06 pm
Forum: Tercel 4WD Parts: New and Used
Topic: Any leads on window glass?
Replies: 16
Views: 225

Re: Any leads on window glass?

I do not think they used a gasket, they put a heavy bead of polyurethane sealant against the metal, and lay the glass against the soft sealant until it cures. I have seen this done perhaps 5 or 6 times, no gasket, just sealant. there are some plastic clips used to help center the window that stay em...
by Petros
Fri Apr 13, 2018 10:24 pm
Forum: Gallery and Projects
Topic: 1984 Euro Tercel 4WD Wagon
Replies: 34
Views: 975

Re: 1984 Euro Tercel 4WD Wagon

That is just awesome! I love those old alfas. I worked for a owner that raced one of those, he some got the special edition with the aluminum body. It was almost a shame he turned it into a race car. That was about 1976. The street version of this car was called a GTV in the states. A really nice sp...
by Petros
Fri Apr 13, 2018 4:51 pm
Forum: Gallery and Projects
Topic: 1984 Euro Tercel 4WD Wagon
Replies: 34
Views: 975

Re: 1984 Euro Tercel 4WD Wagon

Falken is a decent tire, good for the money. but I found they wear out faster than more costly tires. I went to Micheline M and S tires, and found, despite the higher cost, the per mile cost was actually lower. Nice car collection. Love the Alfa. I worked on one that belonged to my auto shop teacher...
by Petros
Fri Apr 13, 2018 4:45 pm
Forum: Off-Topic
Topic: I can't believe it didn't make the list.
Replies: 2
Views: 59

Re: I can't believe it didn't make the list.

those are editors who usualy just admire cars, but have never been involved with them much. When I worked for Nissan on their racing program they would come around and interview the boss, take pictures of the lastest race cars, and than go write a lot of confusing mishmash car language gobbity gook,...
by Petros
Thu Apr 12, 2018 5:57 pm
Forum: General
Topic: What 14" rims fit tercels
Replies: 26
Views: 6152

Re: What 14" rims fit tercels

I have been running alloy wheels intended for a Honda with a larger hub, not real issues for about ten years. I considered getting hub rings, but have not done it yet. ONce I think I forgot to tighten the lugs after some maintenance, the next day that wheel was making noise so I checked it out. the ...
by Petros
Thu Apr 12, 2018 5:52 pm
Forum: Gallery and Projects
Topic: 2nd project: 1985 4WD
Replies: 10
Views: 121

Re: 2nd project: 1985 4WD

that is one cool vintage toyota. I do not think those were ever imported to North America, there were similar models from Nissan and a funky little honda two seat convertible, but nothing like this.
by Petros
Thu Apr 12, 2018 5:48 pm
Forum: Tercel 4WD Parts: New and Used
Topic: Any leads on window glass?
Replies: 16
Views: 225

Re: Any leads on window glass?

I got one from safelite last summer. They had to order it which took a week. But they were able to get it. yes, same here. I just had to plan ahead. but even in LA the installer must find a supplier and than go get it, but it is much faster, and cheaper, than what I found here in the Puget Sound ar...
by Petros
Thu Apr 12, 2018 2:51 pm
Forum: Tercel 4WD Parts: New and Used
Topic: WTB: 3a cylinder head
Replies: 18
Views: 302

Re: WTB: 3a cylinder head

I have gotten broken bolts out that were broken off below the surface using that technic. It it is really corrored and stuck, than chemical warfare may be the only way to win, but usually a broken bolt has the load off of it so it is just a matter of getting lubricated, a little heat, and than tap i...