Search found 23 matches

by Nimai_SR5Wagon
Thu Dec 01, 2022 8:15 am
Forum: Tercel 4WD Repair Questions
Topic: Radiator blew/ engine ran really hot
Replies: 1
Views: 42

Radiator blew/ engine ran really hot

Hi guys, So the past few days I’ve been getting to daily my Tercel due to my daily getting rear ended so it’s in the collision shop. (Really not ideal but I enjoy driving the car) Car drives amazing since all the work I’ve done, I commute 35 miles one way. Tercel stays steady on speed limit (45-65mp...
by Nimai_SR5Wagon
Sun Oct 09, 2022 4:46 pm
Forum: Tercel Gallery and Projects
Topic: Refreshed paint job
Replies: 5
Views: 229

Refreshed paint job

I took some time to sand off the old dry cracked bed liner the previous owner had put on the car. Used some Raptor aerosol bed liner to re do it. It came out pretty nice for a 80$ paint job.
by Nimai_SR5Wagon
Mon Sep 26, 2022 12:56 pm
Forum: Repair Guides
Topic: Clutch Chatter/Vibration
Replies: 41
Views: 2078

Re: Clutch Chatter/Vibration

Thank you for helping me look at the simple things first, i was dreading having to get into the clutch assembly again. I looked at the sector and paw mechanism and it looked perfect in relation to the FSM, so i decided to try to put washers on the cable where it meets with the bellhousing above the ...
by Nimai_SR5Wagon
Fri Sep 23, 2022 2:44 pm
Forum: Repair Guides
Topic: Clutch Chatter/Vibration
Replies: 41
Views: 2078

Re: Clutch Chatter/Vibration

I got the car back on the ground, won’t go into gear….

So sad..
by Nimai_SR5Wagon
Fri Sep 16, 2022 10:46 am
Forum: Repair Guides
Topic: Clutch Chatter/Vibration
Replies: 41
Views: 2078

Re: Clutch Chatter/Vibration

Petros and Nordical, The TPS was what it was, and ive been referring to the FSM like crazy, its my savior. The linkage was sticking so when i would blip the throttle the TP decelerator mechanism would extend to help with the deceleration - but as my foot came off the pedal the throttle linkage came ...
by Nimai_SR5Wagon
Wed Sep 14, 2022 1:31 pm
Forum: Repair Guides
Topic: Clutch Chatter/Vibration
Replies: 41
Views: 2078

Re: Clutch Chatter/Vibration

Cold start the choke is engaged and it idles around 1500RPM, after a little i'll pump the throttle and it will drop to "warm" idle around 850RPM (i plan to advance it a bit) while around normal operating temperature, at warm idle, if i press the gas pedal it will rev along normally, but on...
by Nimai_SR5Wagon
Tue Sep 13, 2022 9:51 pm
Forum: Repair Guides
Topic: Clutch Chatter/Vibration
Replies: 41
Views: 2078

Re: Clutch Chatter/Vibration

Wasn’t bad at all, found that the HAC vacuum line to the distributor was cracked, replaced it and now it holds an idle. I will advance the timing a tad, Choke seems to be working well. But now when I pump the throttle it will rev up to around 1500 without me holding the pedal down then it drops back...
by Nimai_SR5Wagon
Tue Sep 13, 2022 3:50 pm
Forum: Tercel 4WD Repair Questions
Topic: Erratic Idle - If it Idles at All
Replies: 16
Views: 671

Re: Erratic Idle - If it Idles at All

Tabercro,

Did you ever resolve this issue? Any Conclusions?

Thank you,
by Nimai_SR5Wagon
Sun Sep 11, 2022 1:00 pm
Forum: Repair Guides
Topic: Clutch Chatter/Vibration
Replies: 41
Views: 2078

Re: Clutch Chatter/Vibration

UPDATE: I finally got my flywheel back from machine shop after 3 months (he was doing my 22R block and flywheel also). Still a long time… This weekend I replaced the clutch, kept it very clean, torqued down P/P bolts evenly, installed bearings and clutch, reinstalled the transmission. After some eff...
by Nimai_SR5Wagon
Tue Mar 29, 2022 10:36 am
Forum: Repair Guides
Topic: Clutch Chatter/Vibration
Replies: 41
Views: 2078

Re: Clutch Chatter/Vibration

Petros, unfortunately no.. the clutch disc itself has a bigger diameter than the tercels flywheel. Incompatible so i need to send it back.. Slimdude85, hmm i didnt even think that, the "wear on the fingers" does look odd but it almost looks like a heat treat to me but i cant be sure. Eithe...
by Nimai_SR5Wagon
Fri Mar 25, 2022 3:37 pm
Forum: Repair Guides
Topic: Clutch Chatter/Vibration
Replies: 41
Views: 2078

Re: Clutch Chatter/Vibration

Well, i ordered a AISIN clutch from rockauto, part number CKT-010 but Aisin packaged the wrong clutch and packaged a Toyota Surf clutch CTX-106…. How nice for me hahaha B925E512-9C7C-4ED4-A5C0-75C8B589447D.jpeg 3570BCBD-7256-473E-A007-50CFEEB86A2C.jpeg 1C595AA9-493B-4722-8C77-79312330BF32.jpeg
by Nimai_SR5Wagon
Wed Mar 23, 2022 5:12 pm
Forum: Repair Guides
Topic: Clutch Chatter/Vibration
Replies: 41
Views: 2078

Re: Clutch Chatter/Vibration

Motor mounts are definitely bad I can pull on the engine with very little force with one arm… easily moved 3-5inches

3A353AC4-2290-4979-AC3B-70C5EB3F1F2F.jpeg
AA8C4428-E9A2-4A98-9A5D-91B72663DE28.jpeg
by Nimai_SR5Wagon
Wed Mar 23, 2022 8:52 am
Forum: Repair Guides
Topic: Clutch Chatter/Vibration
Replies: 41
Views: 2078

Re: Clutch Chatter/Vibration

Chris, I was looking at the FSM and noticed those pedal adjustment specs, i dont remember ever adjusting according to something like that, the "6 teeth" seems familiar though, i will be making sure its in spec when i re install. Very possible the pedal height isnt ideal... Also i noticed o...
by Nimai_SR5Wagon
Tue Mar 22, 2022 7:51 pm
Forum: Repair Guides
Topic: Clutch Chatter/Vibration
Replies: 41
Views: 2078

Re: Clutch Chatter/Vibration

I’ve kept a close eye on the engine oil when I changed it and I saw hardly (if any) metallic glitter. I’ll change it again soon to check again.. The engine runs strong and has good pull when in gear…. And once it’s in gear it’s smooth, just getting it in there is rough… also 300,000 miles so really ...
by Nimai_SR5Wagon
Tue Mar 22, 2022 2:01 pm
Forum: Repair Guides
Topic: Clutch Chatter/Vibration
Replies: 41
Views: 2078

Re: Clutch Chatter/Vibration

Chris, I replaced the sector and paw in the pedal assembly, also bought a clutch cable (when i had initially had chatter before the first attempt to fix it) but its been difficult to confirm the length is correct with the fact that the clutch hasnt worked properly anyways. Ive noticed that when the ...