Search found 26 matches
- Fri Jan 27, 2023 10:26 am
- Forum: Tercel 4WD Repair Questions
- Topic: Radiator blew/ engine ran really hot
- Replies: 6
- Views: 1442
Re: Radiator blew/ engine ran really hot
I found out im a dummy, i had no idea that an alternator labled external regulator means you need a voltage regulate that is external to the alternator.... i wont cry if you laugh at me and shake your head.. Ill be getting a new alternator with an internal voltage regulator.. poor tercel was walking...
- Sun Jan 22, 2023 12:20 pm
- Forum: Tercel 4WD Repair Questions
- Topic: Radiator blew/ engine ran really hot
- Replies: 6
- Views: 1442
Re: Radiator blew/ engine ran really hot
No there are internally regulated ones but they were 20$ more so I just went to save a few bucks because I didn’t think it would matter at all. I’ll probably just buy the internally regulated one, because that’s the only difference in the system
- Mon Jan 16, 2023 4:46 pm
- Forum: Tercel 4WD Repair Questions
- Topic: Radiator blew/ engine ran really hot
- Replies: 6
- Views: 1442
Re: Radiator blew/ engine ran really hot
Hey guys, Got a new radiator and alternator. Installed everything and put new coolant. Car seems to run strong as ever, no white smoke, temps are normal. Only funny thing is that I bought a new alternator with an external regulator (old one was internal) as soon as I plugged it in and connected batt...
- Thu Dec 01, 2022 8:15 am
- Forum: Tercel 4WD Repair Questions
- Topic: Radiator blew/ engine ran really hot
- Replies: 6
- Views: 1442
Radiator blew/ engine ran really hot
Hi guys, So the past few days I’ve been getting to daily my Tercel due to my daily getting rear ended so it’s in the collision shop. (Really not ideal but I enjoy driving the car) Car drives amazing since all the work I’ve done, I commute 35 miles one way. Tercel stays steady on speed limit (45-65mp...
- Sun Oct 09, 2022 4:46 pm
- Forum: Tercel Gallery and Projects
- Topic: Refreshed paint job
- Replies: 6
- Views: 6095
Refreshed paint job
I took some time to sand off the old dry cracked bed liner the previous owner had put on the car. Used some Raptor aerosol bed liner to re do it. It came out pretty nice for a 80$ paint job.
- Mon Sep 26, 2022 12:56 pm
- Forum: Repair Guides
- Topic: Clutch Chatter/Vibration
- Replies: 41
- Views: 17347
Re: Clutch Chatter/Vibration
Thank you for helping me look at the simple things first, i was dreading having to get into the clutch assembly again. I looked at the sector and paw mechanism and it looked perfect in relation to the FSM, so i decided to try to put washers on the cable where it meets with the bellhousing above the ...
- Fri Sep 23, 2022 2:44 pm
- Forum: Repair Guides
- Topic: Clutch Chatter/Vibration
- Replies: 41
- Views: 17347
Re: Clutch Chatter/Vibration
I got the car back on the ground, won’t go into gear….
So sad..
So sad..
- Fri Sep 16, 2022 10:46 am
- Forum: Repair Guides
- Topic: Clutch Chatter/Vibration
- Replies: 41
- Views: 17347
Re: Clutch Chatter/Vibration
Petros and Nordical, The TPS was what it was, and ive been referring to the FSM like crazy, its my savior. The linkage was sticking so when i would blip the throttle the TP decelerator mechanism would extend to help with the deceleration - but as my foot came off the pedal the throttle linkage came ...
- Wed Sep 14, 2022 1:31 pm
- Forum: Repair Guides
- Topic: Clutch Chatter/Vibration
- Replies: 41
- Views: 17347
Re: Clutch Chatter/Vibration
Cold start the choke is engaged and it idles around 1500RPM, after a little i'll pump the throttle and it will drop to "warm" idle around 850RPM (i plan to advance it a bit) while around normal operating temperature, at warm idle, if i press the gas pedal it will rev along normally, but on...
- Tue Sep 13, 2022 9:51 pm
- Forum: Repair Guides
- Topic: Clutch Chatter/Vibration
- Replies: 41
- Views: 17347
Re: Clutch Chatter/Vibration
Wasn’t bad at all, found that the HAC vacuum line to the distributor was cracked, replaced it and now it holds an idle. I will advance the timing a tad, Choke seems to be working well. But now when I pump the throttle it will rev up to around 1500 without me holding the pedal down then it drops back...
- Tue Sep 13, 2022 3:50 pm
- Forum: Tercel 4WD Repair Questions
- Topic: Erratic Idle - If it Idles at All
- Replies: 16
- Views: 1895
Re: Erratic Idle - If it Idles at All
Tabercro,
Did you ever resolve this issue? Any Conclusions?
Thank you,
Did you ever resolve this issue? Any Conclusions?
Thank you,
- Sun Sep 11, 2022 1:00 pm
- Forum: Repair Guides
- Topic: Clutch Chatter/Vibration
- Replies: 41
- Views: 17347
Re: Clutch Chatter/Vibration
UPDATE: I finally got my flywheel back from machine shop after 3 months (he was doing my 22R block and flywheel also). Still a long time… This weekend I replaced the clutch, kept it very clean, torqued down P/P bolts evenly, installed bearings and clutch, reinstalled the transmission. After some eff...
- Tue Mar 29, 2022 10:36 am
- Forum: Repair Guides
- Topic: Clutch Chatter/Vibration
- Replies: 41
- Views: 17347
Re: Clutch Chatter/Vibration
Petros, unfortunately no.. the clutch disc itself has a bigger diameter than the tercels flywheel. Incompatible so i need to send it back.. Slimdude85, hmm i didnt even think that, the "wear on the fingers" does look odd but it almost looks like a heat treat to me but i cant be sure. Eithe...
- Fri Mar 25, 2022 3:37 pm
- Forum: Repair Guides
- Topic: Clutch Chatter/Vibration
- Replies: 41
- Views: 17347
Re: Clutch Chatter/Vibration
Well, i ordered a AISIN clutch from rockauto, part number CKT-010 but Aisin packaged the wrong clutch and packaged a Toyota Surf clutch CTX-106…. How nice for me hahaha B925E512-9C7C-4ED4-A5C0-75C8B589447D.jpeg 3570BCBD-7256-473E-A007-50CFEEB86A2C.jpeg 1C595AA9-493B-4722-8C77-79312330BF32.jpeg
- Wed Mar 23, 2022 5:12 pm
- Forum: Repair Guides
- Topic: Clutch Chatter/Vibration
- Replies: 41
- Views: 17347
Re: Clutch Chatter/Vibration
Motor mounts are definitely bad I can pull on the engine with very little force with one arm… easily moved 3-5inches