Search found 7 matches
- Wed Mar 31, 2021 8:53 pm
- Forum: Part Numbers - OE and Aftermarket
- Topic: Part Number For Aisan Carburetor Accelerator Pump Arm Washer
- Replies: 1
- Views: 6129
Part Number For Aisan Carburetor Accelerator Pump Arm Washer
Hi there, I rebuilt my Aisan carburetor but there's a washer that broke off. I can't find a part number for a replacement. I've attached a screenshot which shows the washer, spring and clip. This was taken from Robert Walker's (forum member, xirdneh) Aisan carburetor teardown video at around 57:40 m...
- Thu Jun 18, 2020 8:40 pm
- Forum: Tercel 4WD Repair Questions
- Topic: 4AC engine block steam holes
- Replies: 11
- Views: 2995
Re: 4AC engine block steam holes
Hey Petros, Thanks for the additional ideas. I hadn't thought to check the water pump for an internal leak. Externally, it seems fine and I can't see any leaks, even when pressure is applied. But internally, I know there's an o-ring that mates between the pump and the block. So maybe I'll pull the p...
- Sat Jun 13, 2020 7:58 pm
- Forum: Tercel 4WD Repair Questions
- Topic: 4AC engine block steam holes
- Replies: 11
- Views: 2995
Re: 4AC engine block steam holes
Hi Petros, Thanks for all those good suggestions. Beleive it or not, over the course of troubleshooting and replacing components, I did eventually hit all those points you suggested. A couple of comments... All the hoses were replaced and checked for leaks. Those were all good. The radiator was also...
- Sun Jun 07, 2020 9:36 am
- Forum: Tercel 4WD Repair Questions
- Topic: 4AC engine block steam holes
- Replies: 11
- Views: 2995
Re: 4AC engine block steam holes
Thanks, Chris. I'll give that a try with a small hammer. If things don't budge after that, I'll probably just leave it as is, then see where things are at after reassembling, most likely using Petros' head gasket mod.
-Rick
-Rick
- Wed Jun 03, 2020 9:10 pm
- Forum: Tercel 4WD Repair Questions
- Topic: 4AC engine block steam holes
- Replies: 11
- Views: 2995
Re: 4AC engine block steam holes
Hey guys, Thanks a lot for the replies and all the great information. It's really helpful. Regarding something Chris wrote: "I don't remember having to drill anything, but there was some grunting with a stiff wire as I recall." Do you mean to suggest that it was pretty tough to get the hol...
- Mon Jun 01, 2020 9:28 pm
- Forum: Tercel 4WD Repair Questions
- Topic: 4AC engine block steam holes
- Replies: 11
- Views: 2995
Re: 4AC engine block steam holes
Hi Chris, Thanks for the reply and the info on what you did with your 4AC. I'll give it another try using a stiff wire of some kind. The pick tool I was using has a tapered diameter so as it gets deeper in, it's probably getting stopped due to the limits of block's hole diameter. Thanks for the link...
- Sun May 31, 2020 6:57 pm
- Forum: Tercel 4WD Repair Questions
- Topic: 4AC engine block steam holes
- Replies: 11
- Views: 2995
4AC engine block steam holes
Hello there, New user here; first post. Hopefully this is right forum. I am doing my first head gasket job on my 4AC engine and I'm confused about 3 particular holes in the block. I've uploaded 2 attachments which show the block with and without the head gasket overlaid on the block. In the photo wi...