Tercel4WD.com

Yep, just unplug it. It'd be nice to repurpose it as a "turn your lights off" reminder would take some mods but I think someone has done it already.

That's a one way check valve I believe. You should be able to replace it with a generic aftermarket one that fits. I'd replace all of your vacuum lines if your check valve is that brittle...likely the lines are too. You can get a roll of silicone hose on eBay for around $20. Get the 3.5mm...works pe...

I'd try to return the cardone too. They're usually reasonable about it plus they need to know it's wrong. Since you already put it on they'll likely just credit you.

I should have updated this man...sorry. trakmotive work perfect, cardones have to be shaved down somehow. I think xirdneh is writing cardone about how they suck. Where are you located?

Yea, I must have misunderstood. Lets definitely reschedule. I got most of my front end replaced and lift finished yesterday. An inner tie rod and cv axles today and I'll be good to go for trail rides.

Big thanks to xirdneh for the hook up on the parts I needed!

I just made one following xirdneh's blueprint here:

viewtopic.php?f=10&t=13310&p=102412&hilit=seal#p102412

Worked perfectly.

My apologies but I thought this weekend was no good for you, Petros. I made plans with a friend to replace the entire front end in my offroad rig tomorrow. Turns out I wouldn't be able to trail ride anyway as my offroad rig had been sitting a while waiting on a new CV axle and seal. I got it in last...

Did it spiderweb? I got a chip that I'm about to fix with that windshield repair stuff...seems like it will work pretty well.

In that case...this one looks pretty sweet: https://www.autoaccessoriesgarage.com/Tonneau-Covers/Retrax-Powertrax-Pro-MX-Tonneau-Cover?utm_source=google&utm_medium=Tonneau-Covers&utm_campaign=GoogleProducts&utm_term=Retrax-Powertrax-Pro-MX-Tonneau-Cover&utm_campaignid=182462050&utm_adgroupid=3819692...

I think we got a troll here. If you don't live under a bridge, Gedur, then you must have chopped your Tercel? In which case you won't find a Tonneau for it...obviously.

Darn it. That tweed pattern door panel is my unicorn.

xirdneh...I'm not sure which side the solenoid was from at the moment but I'll look at my pictures later but I'm assuming it's the driver side as it's off an 83. Are you saying that it doesn't need the tip on it to function properly? I found your video...haven't made it all the way through yet but i...

What pattern is the interior? I'm unfamiliar with the 86's. Any chance the door panels are the stripey tweed look?

I've read and re-read this thread and several others. I finally decided on the Redline MT-90 as well...largely from your report, Professor. I just got mine in the mail today so it's nice to see this update.