Search found 18 matches
- Tue Feb 02, 2021 7:27 pm
- Forum: Part Numbers - OE and Aftermarket
- Topic: Transmission and differential drain plugs
- Replies: 10
- Views: 9672
Re: Transmission and differential drain plugs
The 24mm low profile drain plugs are known to be easily marred/stripped when attempting to remove, later model Toyotas use the same plug threads only in an internal hex (allen) plug. These are the Toyota part numbers for longer magnetic plugs for drains and shorter non-magnetic plugs for side/fill....
- Tue Feb 02, 2021 6:54 pm
- Forum: Part Numbers - OE and Aftermarket
- Topic: Transmission and differential drain plugs
- Replies: 10
- Views: 9672
Re: Transmission and differential drain plugs
The 24mm low profile drain plugs are known to be easily marred/stripped when attempting to remove, later model Toyotas use the same plug threads only in an internal hex (allen) plug. These are the Toyota part numbers for longer magnetic plugs for drains and shorter non-magnetic plugs for side/fill....
- Wed Sep 09, 2020 4:59 pm
- Forum: General
- Topic: Alternator Identification
- Replies: 0
- Views: 1111
Alternator Identification
I’ve recently had some charging issues. Classic ‘Charge’ and ‘Brake’ lights on, and then she full-on died on me one day. The battery is good, I put it on a foot charger and it fired right up, and held starting charge for over a month. No issues there. I’m assuming it’s the alternator, but I’ve seen ...
- Thu Apr 09, 2020 10:06 pm
- Forum: General
- Topic: Oil Pump Gasket
- Replies: 15
- Views: 4783
- Thu Apr 09, 2020 12:44 pm
- Forum: General
- Topic: Oil Pump Gasket
- Replies: 15
- Views: 4783
Re: Oil Pump Gasket
pulling the front cam bearing cap is an easy way to get the seal out. carefully wiggle it out, and the seal stays behind, and you can just lift it out. torque it down very carefully, the bolts go into the aluminum head. do not over tighten. front seals, crank or cam, can leak with a drip, or a torr...
- Wed Apr 08, 2020 9:23 am
- Forum: General
- Topic: Oil Pump Gasket
- Replies: 15
- Views: 4783
Re: Oil Pump Gasket
Thanks, guys. Parts just came in, so I should have it put back together today or tomorrow. I'll report back with findings.
- Sun Apr 05, 2020 6:11 am
- Forum: General
- Topic: Oil Pump Gasket
- Replies: 15
- Views: 4783
Re: Oil Pump Gasket
i pick up one of these seal pullers,,works great,,drill a couple of 1/16 holes in the seal,,screw the puller in to a hole,, a few slides with the weight and out pops the seal,,its just a small slide hammer puller Pretty cool gizmo ya got there. I ended up just popping the first bearing cap off and ...
- Fri Apr 03, 2020 12:53 pm
- Forum: General
- Topic: Oil Pump Gasket
- Replies: 15
- Views: 4783
Re: Oil Pump Gasket
it is really rare that the pan gasket will leak, more likely it is running down to the pan from somewhere else, and than runs around the pan gasket, dripping off of it and making it appear to be coming from the pan. Usually it is not. most likely cause in the front of the engine is the main seal, w...
- Fri Apr 03, 2020 7:41 am
- Forum: General
- Topic: Oil Pump Gasket
- Replies: 15
- Views: 4783
Re: Oil Pump Gasket
it is really rare that the pan gasket will leak, more likely it is running down to the pan from somewhere else, and than runs around the pan gasket, dripping off of it and making it appear to be coming from the pan. Usually it is not. most likely cause in the front of the engine is the main seal, w...
- Thu Apr 02, 2020 3:56 pm
- Forum: General
- Topic: Oil Pump Gasket
- Replies: 15
- Views: 4783
Re: Oil Pump Gasket
Anybody know the location of the "four bracket bolts" referred in the FSM for the removal of the oil pan? Also, what stabilizer are they talking about?
- Thu Apr 02, 2020 7:06 am
- Forum: General
- Topic: Oil Pump Gasket
- Replies: 15
- Views: 4783
Re: Oil Pump Gasket
That's what I thought. I'm gonna get the timing belt and pulley off today and see if I can see what shape the gasket is in. Luckily, I ain't going anywhere!teranfirbt wrote: ↑Wed Apr 01, 2020 10:04 pm Nope, in order to get the pump off you have to remove the oil pan and the pickup.
- Wed Apr 01, 2020 3:30 pm
- Forum: General
- Topic: Oil Pump Gasket
- Replies: 15
- Views: 4783
Oil Pump Gasket
Is it possible to replace the oil pump gasket without fully dropping the oil pan? I've got some oil puking from that general vicinity, so I suspect crankshaft seal or oil pump gasket but haven't gotten all the way in there. Just wondering if it's possible.
- Fri Feb 07, 2020 9:45 pm
- Forum: General
- Topic: Wiper arm question
- Replies: 2
- Views: 2249
Re: Wiper arm question
I've got an '85 Land Cruiser that you can swap in '96-99 4runner arms for massive improvement. Might be worth scavenging some late 90s Corolla wiper arms from a junk yard to see if they fit. Toyota is pretty notorious for keeping some of those little things the same over generations and models so it...
- Sun Apr 28, 2019 11:28 am
- Forum: General
- Topic: Alternatives to OEM Ventilation Hose
- Replies: 3
- Views: 1157
Alternatives to OEM Ventilation Hose
I'm looking to replace the PCV ventilation hoses coming out of the top of the valve cover. Parts numbers 1226115020 and 1226215030. They're both NLA and I was looking for some advice as to what would be an acceptable substitute or what other folks have done to replace them. Thanks!
- Wed Mar 27, 2019 5:04 pm
- Forum: Tercel 4WD Repair Questions
- Topic: Need Real-time Help. Car won't start.
- Replies: 5
- Views: 1806
Re: Need Real-time Help. Car won't start.
Shut 'er down, boys. Problem solved. Probably should have just consulted Google instead of clogging up the board. Thanks for your help, @BaileySims.