Tercel4WD.com

Ok I'll do that tonight! If nothing else, this will be helpful for other who run into this issue in the future. I'll measure from the underside of the spring seat to the bottom of the strut tube on both the 4WD one and the 2WD one and post what I get here.

Please let me know if you happen to have one, we're pretty stuck right now. I'm worried using the preassembled 2WD struts that are everywhere online won't help me achieve the same lift as if I used the KYB #363045 and the stock strut tube, assuming I use the aftermarket springs. Am I correct?

I'm very interested, I'll talk to my friend and see if we can make a road trip out of it!

Hello all! I recently started putting together the Abra-Cadaver lift, but I ran into a problem. It seems that at some point in this car's life, someone swapped out the front driver side strut tube with one that's about an inch shorter, which prevents me from dropping in the new strut (KYB #363045). ...

I'm looking for a hood and possibly a driver side fender for my 86 4WD wagon in the California area. I checked the local PnPs, and happened to find a passenger fender in Fresno, though the other parts were already gone. Thanks!

Awesome, thank you!

Thanks everyone! I've been scrounging around and happened to find an 86 transmission to replace it with for a bit more cash. But good to know that's a thing.

Hello all! I just picked up a 1986 Tercel 4WD with the 6 speed for cheap, as first gear is popping out sometimes. I've been reading up a little bit on that problem on how to go about fixing that, but I was hoping I could get some info. I can buy a replacement 6 speed 4WD transfercase/trans out of a ...