Tercel4WD.com

Having troubles getting those filler plugs off the trans, every single one of my 24mm sockets slide off and proceed to strip the bolts which has made me hold off on trying to get them off(any tips for getting them off appriciated) is it possible to fill the trans through the shifter,m? I've done thi...

I'm not sure on how to post a picture on here ahah, I'll try to figure it out, in the meantime I believe it was the housing for the speedometer cable, the aluminum casting that goes into the trans snapped in half, I've got some aluminum in weld on it as of now.

Was draining trans when my arm gently grazed the what looks like a clutch cable version of a clutch slave cylinder. i had noticed that it had been practically drowned in some sort of epoxy by the previous owner/mechanic. its snapped right in half, just looking for the name of the thing, any help app...

Thanks for the help guys! Is the egr modulator nearer the carb? Smaller circle piece, UFO shape almost?

Hey all, up until yesterday my turd has been running great, however the car once warm wont idle at its normal 900 rpm it had before. The car will run perfectly fine when given gas and I have been able to just barely get to and from work by keeping my foot over the gas when not in gear. I'll be chang...

I got my clutch replaced as well as both cv axle seals and the rear main engine seal. It leaked gear oil before the repair. It still leaks slightly, any other potential areas for leaks if gear oil on the underside of the trans.

Hey there, I'm looking to get my clutch and front axles done aswell as whatever work in the same immidiate area. My cv leak comes from where it actually meets the trans, the boots are not leaking but it does have a fairly steady leak out of what I presume is a cv axle seal?? The clutch has been roug...

Thank you for the infomation guy! Really appreciate it.
Would a convential spark plug be considered copper? Or platinum?

Hey I've been searching the forum for the ideal spark plug and wire, I can gap them and what have you. But I am seeing a lot of extra stuff and I'm fairly newbie with this stuff. Do I have to orientate the plug a certain way? How do I have the spark plug pointing the exact way that is ideal as some ...

Ya was pretty bogus. But still working alright "knock on wood" I live on a fairly large island, be it an island. Next to Vancouver, local parts stores nor big part chains carried it, only a whole clutch assembly. Only place that had it wa Toyota dealership itself. And their famous for rapi...

I see thank you very much for the info guys. I'm just taking the pedal apart now. I have gotten to taking out the collar and nut, however it was oppisite of the FSM, with fsm showing the pedal shaft going in through the right side with the nut on the left, should I do as fsm when putting back togeth...

Also, with replacing the release sector, is there anything else that must be replaces as well. What would cause the release sector to snap as well? Just want to make sure it doesn't happen in the future, I have never owned a car without hydraulic clutch or pushrod for master cylinder so I'm very los...

Hi there, I've just purchased a 86 sr5 4wd, right as I got it in the driveway I put my foot on the clutch to park it in first and the plastic gear with teeth from behind the pedal snaps away from the other half of itself. I've searched everywhere and have finally found the part at a dealership... fo...