Tercel4WD.com

there are no 6 speeds. the 5+1 is incompatible with the fwd cars. hardest part is drilling the holes for the clutch box, and successfully removing the clutch cable guide on the firewall. brake booster will also have to get removed to drill holes. if you find the parts and need help, lmk. I converted...

Austin wrote: ↑Mon Sep 18, 2023 8:57 am Fuel filter has been replaced and carb was clean and rebuilt. What do you mean by idle circuit? Vacuum lines have all been replaced.

idle circuit is apart of the carb. its what meters the fuel for idle. who did the clean and rebuild, and how was it cleaned?

Having trouble with my 1985 manual wagon. The car sat unused for a bit over 10 years. Started briefly when it was removed from the garage but wasn't driven. Since bringing it home we've gone through a lot of different parts. Parts replaced include: Front and rear brake hardware. MR2 break upgrade O...

update: been trying so hard to get the car tuned. Initially i was having really bad issues with sharp lean AFR spikes as soon as boost rolled in, then it turned to the engine randomly losing fuel pressure while casually driving. Pumps are called pumps for a reason not Sucks...I was trying to pull fu...

I followed the dimensions from fb user JayJay Idingo (hes on there, dont know his name though). Funny you mention that because I randomly thought about this a few days ago and wonder if he is JDNightFox on here. JDNightFox used to have a profile pic that looked like JayJay Idingo's dog mask thing. ...

Finally. Flywheel is back and installed. The reason the machine shop took so long with it is cause I dropped it off right before they fired a long timer engineer, and the guy had like a 3 month back log of work the shop had to catch up on. I also took it to a driveshaft shop to get it balanced. They...

HI, just asking a simple question. Under the hood looking straight down on a 1984 Toyota Tercel DXL the electric fan with its own dedicated smaller radiator. Is that for the AC or Transmission? Just asking because it in the low 90 here in Duluth, MN and I have never seen that fan turn. Checked all ...

Thank you member 'dlb' for your understanding, you nailed it, it's personal. Much effort and sweat went into this collection back in the days, 2010 through 2016 NOW I am 100% into it all being gone in one move, to make it easy, I don't need the money. Hoping some of this will be used, or resold to ...

Mpack wrote: ↑Fri Jul 21, 2023 8:35 amWhen and where?

click the link above for the event details.

sept 8-11, tabernash Co, YMCA of the Rockies - Snow Mountain Ranch.

1985 4WD, 5-Speed Sta. Wagon w MANY New parts. Running w 199,000 miles. But Manual tranny must have leaked gear-oil, so now it makes a clicking sound tho' full of fluid. See the Adv. on SFe NM Craigs List. BAT or local PU in TAOS, NM. $1800. input shaft has teeth missing. trans is essentially junk....

Oh nice! It is a blue top, just unsure of the exact year. I’ve just been calling it a 1983 when looking for parts, and hoping for the best. I’m currently searching for a water pump, however I’m not having any luck with my local parts suppliers. Any online recommendations? is your water pump pulley ...

I am looking for someone to take all for free (need a pickup or van) Otherwise, a running stock carb is $200, after a driving demonstration, I will remove it on the spot to sell. it will idle smoothly and go into full secondary power. Collection of 12 TVSV's and a gas valve all for $50, none are te...

What is the "slight hiccup" at idle, can you be more specific? I definitely agree with SirFoxx re: tempering expectations of an old carb'd engine. So if by hiccup you mean sometimes it idles at 600 instead of 800 rpm, I'd say that's just fine. But if you mean it sometimes runs rough or al...

I'm cleaning out all my Tercel stuff, bring a pickup and take it all away!! FREE Portland Oregon. I'm ready to haul it all to dump. Transmission, 4.1 transaxle and rear differential. source: pulled from a blown engine 85 tercel Left front fender spotless no rust. Hatchback lid spotless Large collec...

Hello, So I’ve spent the past few months fixing up this 84 T4WD I purchased in the end of March. Cleaned and went through replacing a bunch of clogged and old carb parts, replaced the vacuum advance on the dizzy, went through the vacuum line’s replacing all of them while also checking routing and t...