Tercel4WD.com

I don’t think you’ll find more hose. It should slip over the nipple on the valve cover and the other end slides over metal pipe leading to the air filter housing. I would expect it will be difficult to save.

Chris

Hey desertrat, It seems dieseling most often occurs when timing is off, you might give it a check. Most of us shoot for 10 BTDC vs the spec’d 5 degrees. As for your hose challenge, I don’t have a good answer. I’ve kinked normal flex hosing and am currently using some 1/2” copper waterline fitting wh...

David,

I will reach out to Paul and see if that is hard to change. I assume it’s all about file size, but ??

Welcome back Jeffro.

Chris

Thanks David, that’s something to keep in mind.

Chris

TD,

The transmissions are interchangeable through all years. The gear change from 84’-85’ was in the differentials. There were slight changes in the transmission as well through the years, but nothing major.

Chris

TT,

What color are you after? Check out Mr. Wrenches post about parting a Tercel. Luke is awesome and that car has the grey interior.

Chris

Yes, I saw that. Still too pricey for me and I have my hands full.

Chris

zaru,

The FSM is under the General tab, under General “stickies”.

We do have a great group here, but the 3E engine was the next generation, so you won’t find much here. I’m surprised it still used a carb? If you post with questions, there may be some helpful responses. Good luck.

Chris

I’ve fought these some, but not too bad. I keep the stock “thin” drain plugs on the bottom, my 15/16” socket has always removed them with a breaker bar and a little care. About any side fill plug I remove gets swapped with a new 19mm plug with a nice tall top. O’Reilly AP carries them and they sure ...

Not yet, I’m a shade tree mechanic, so I try things that make sense to me. I just added a 1/2” steel plate to mount front calipers on the rear. Calipers swap sides to keep the bleeders on top and hoses are added. I’m still driving with zip ties holding the brake lines/hoses in place. I had to remove...

Fantastic work sir! I’ve never been into a combination brake valve. However, I added stock Tercel calipers (front) to the rear of my car and have 4 wheel disc brakes now. I did not change the combination valve and it drives well. It may pissibly lick the back brakes a little early in very icy, slick...

Welcome CD,

While the pic shows vented rotors, they indicate “solid” in the literature. If you want vented rotors, you can step up to the MR2 rotor/caliper swap.

Chris

I’m not much help, no smog testing in rural Missouri. You might start a new thread specific to smog testing. I would expect petros and a few others to reply.

Chris

dak, You don’t need to mess with the air filter at all for the stock set up. The AS filter just bolts to the fender area and pulls clean air in from there to likely improve the catalytic converter “burn”. Air flow is controlled by the reed valve and I don’t know how much this may help you on smog. C...

Hey Nordical,

I picked up an 87’-88’ grill not long ago. I’ll share pics tomorrow.

Chris