Search found 24 matches

by Morency
Wed Apr 03, 2013 4:21 pm
Forum: Tercel 4WD Parts: New and Used
Topic: Tercel 4wd manual transmission with extra low 6 speed
Replies: 2
Views: 982

Re: Tercel 4wd manual transmission with extra low 6 speed

Right. Car interior is restored with new seats and carpet..radio. Lots have been do to it now and it is a good runner. I would keep the tranny but need more for the Saab. I can include the pedal box if needed.
by Morency
Wed Apr 03, 2013 3:05 pm
Forum: Tercel 4WD Parts: New and Used
Topic: Tercel 4wd manual transmission with extra low 6 speed
Replies: 2
Views: 982

Tercel 4wd manual transmission with extra low 6 speed

Clean tranny with 200k km. Asking 300$ nicmorency@hotmail.com Im in Montreal. I will ship worldwide
by Morency
Mon Jan 16, 2012 7:02 pm
Forum: Part Numbers - OE and Aftermarket
Topic: Aftermarket Fuel Tank Pick up hanger?
Replies: 4
Views: 3629

Re: Aftermarket Fuel Tank Pick up hanger?

I'm in Montreal.

I would really like a brand new unit just in case.

I don't see the part available from the supplier I use so far, not even on ebay...
by Morency
Mon Jan 16, 2012 8:05 am
Forum: Part Numbers - OE and Aftermarket
Topic: Aftermarket Fuel Tank Pick up hanger?
Replies: 4
Views: 3629

Aftermarket Fuel Tank Pick up hanger?

Hi guys, I replaced my fuel tank last night. Bought a brand new TO1A. Now, the sending unit (For float level) is fine, but the pick up line is weak. I had to weld new tubes since the 3 tubes from the pick up hanger were rusted out. I'm looking for a replacement unit, but can't find one that actually...
by Morency
Sat Dec 10, 2011 8:07 pm
Forum: General
Topic: Another Tercel/Cross Country Tip pics..
Replies: 12
Views: 3234

Re: Another Tercel..

lol.

That's so funny. Love the hodd that actually hide a 75HP engine...!
by Morency
Wed Dec 07, 2011 8:40 am
Forum: Tercel 4WD Repair Questions
Topic: Filler Neck 'Rubber part' available?
Replies: 27
Views: 5613

Re: Filler Neck 'Rubber part' available?

You guys are a bunch of crazy dudes who loves slow as car. Oh well... =)
by Morency
Tue Dec 06, 2011 8:18 pm
Forum: Tercel 4WD Repair Questions
Topic: Filler Neck 'Rubber part' available?
Replies: 27
Views: 5613

Re: Filler Neck 'Rubber part' available?

I'll see the carb adjustement and hunt for vacuum leak a bit. I don't mind getting the car aligned,my plan is to keep this car a cheap but awesome winter beater. I'm sure even if it's crying for help,bearings yelling, loose ti-rods, half of the car gone in rust, this car will get me threw winter. Ca...
by Morency
Tue Dec 06, 2011 8:14 pm
Forum: Tercel 4WD Repair Questions
Topic: Filler Neck 'Rubber part' available?
Replies: 27
Views: 5613

Re: Filler Neck 'Rubber part' available?

:lol:

Lets say I do 232KM with 24 liters of fuel.

24/232 = 0,103448

Than I would get a 10,35L / 100KM
by Morency
Tue Dec 06, 2011 10:38 am
Forum: Tercel 4WD Repair Questions
Topic: Filler Neck 'Rubber part' available?
Replies: 27
Views: 5613

Re: Filler Neck 'Rubber part' available?

The plastic tube with fittings is working pretty well. No more fuel leaking from the filler at the gas station. I look stupid when I open the hatch, get the rubber tube inside the hole, etc, but at least I don't have money dropping on the ground. Now, my car have an average of 11L/100km...I wonder h...
by Morency
Tue Nov 29, 2011 1:02 pm
Forum: Tercel 4WD Repair Questions
Topic: Filler Neck 'Rubber part' available?
Replies: 27
Views: 5613

Re: Filler Neck 'Rubber part' available?

I take note for the ATF advice.

For the TO1A from rockauto, it's 154$ canadian, and it's the only one available for 4WD.

With shipping, it end up over249$ for the tank, plus duty cost on arrival.

So, don't expect to have a brand new 4WD tank for less than 250$, especially if you are in canada.
by Morency
Tue Nov 29, 2011 10:28 am
Forum: Tercel 4WD Repair Questions
Topic: Filler Neck 'Rubber part' available?
Replies: 27
Views: 5613

Re: Filler Neck 'Rubber part' available?

Temporary solution. Hopefully It won't take 2 hours to put 10L in the car, but diameter is kinda small for the flow gas station give...! .75'' ID tube to 1/2 ID tube. Gas station gun fits tight in the .75'' (It's something like .828'' FYI) I removed the filler neck from the tank we had at work. Ther...
by Morency
Mon Nov 28, 2011 7:33 pm
Forum: Tercel 4WD Repair Questions
Topic: Filler Neck 'Rubber part' available?
Replies: 27
Views: 5613

Re: Filler Neck 'Rubber part' available?

I do like the outboard can idea, but If I end up doing it I think I'll keep it for me :lol: For a group buy, at this point maybe I could argue within the company to get a retailler price, I know it could be cheaper than the actual quote the gave me. Could be 120-140$, can't tell. See how many of you...
by Morency
Mon Nov 28, 2011 7:15 pm
Forum: Tercel Gallery and Projects
Topic: New here! 1987 Tercel 4WD
Replies: 14
Views: 4047

Re: New here! 1987 Tercel 4WD

Merci beaucoup pour l'effort Devin. :D Les Tercel 4WD sont très rares au Québec, disons que nos hivers font la vie dure au Toyota! Pour la couleur, le véhicule à été peinturé il y a 3 ans, donc c'est un vert forêt Volvo, qui donne un très beau look au Wagon. Si tu viens en visiste au Québec, n'hésit...
by Morency
Mon Nov 28, 2011 7:05 pm
Forum: Tercel 4WD Repair Questions
Topic: Filler Neck 'Rubber part' available?
Replies: 27
Views: 5613

Re: Filler Neck 'Rubber part' available?

I did some research tonight for a fuel tank in a scrapyard. There is only one, about 1h drive from my place, that is in descent condition according to the scrapyard. They ask 120$ for it, now way I'll pay that money for a car I've paid 500$, especially for a used tank that might also leak. Even if I...
by Morency
Mon Nov 28, 2011 12:58 pm
Forum: Tercel 4WD Repair Questions
Topic: Filler Neck 'Rubber part' available?
Replies: 27
Views: 5613

Re: Filler Neck 'Rubber part' available?

Funny thing is, I work in a major aftermarket fuel system company. I design fuel modules / fuel pumps / fuel tank for Spectra Premium. We produce one of the only aftermarket tank available for the Tercel 4WD called 'TO1A'. Now, on our redesigned tank, the filler neck is welded to the tank, which is ...