Got this in my email today, no affiliation with blipshift, but this was fun and I thought I'd share.
https://www.blipshift.com/products/so-i ... _07_1_2021
Search found 237 matches
- Thu Jul 08, 2021 11:03 am
- Forum: General
- Topic: Fun T-shirt
- Replies: 0
- Views: 2918
- Sun Apr 14, 2019 12:25 am
- Forum: Repair Guides
- Topic: Broken rear seat latch
- Replies: 1
- Views: 3034
Broken rear seat latch
So about a year ago I was on a camping trip with just a friend and I. We had the rear seat down and all our bags and gear piled in the back, While moving some gear around in the back one of the straps on a bag got hooked on the pull knob for the seat. without realizing it I snapped the latch pull cl...
- Fri Nov 10, 2017 5:28 pm
- Forum: Tercel Gallery and Projects
- Topic: New strut bar
- Replies: 15
- Views: 5422
Re: New strut bar
Yes! used your write up when doing my head gasket. I have it bookmarked on my garage computer 8) The picture is from Black Rock Desert. I took it on an off road trip with my friends, I ran that car up and down High Rock Canyon and then down the east side of BLD to Black Rock Hot Springs. Then we dro...
- Thu Nov 09, 2017 9:39 pm
- Forum: Tercel Gallery and Projects
- Topic: New strut bar
- Replies: 15
- Views: 5422
Re: New strut bar
I took the car to the desert 2 years in a row, took it off road. Both years I ended up popping the head gasket. After doing head gaskets like it was regular maintenance I decided if I wanted to abuse the car I should beef up the cooling system. Originally I went to the wrecking yard and measured rad...
- Wed Nov 08, 2017 11:39 pm
- Forum: Tercel Gallery and Projects
- Topic: New strut bar
- Replies: 15
- Views: 5422
Re: New strut bar
Its a Mitsimoto for a 240SX https://www.mishimoto.com/nissan-240sx-performance-aluminum-radiator-89-94-ka.html I had to relocate the bottom mount holes and make custom mounts for the top. The bottom i made out of some 2" flat bar. I made it the size of the radiator so there is additional protec...
- Wed Nov 08, 2017 10:10 pm
- Forum: Tercel Gallery and Projects
- Topic: New strut bar
- Replies: 15
- Views: 5422
Re: New strut bar
Here is my final set up with the strut bar installed and the "stock" ait cleaner installed. https://i.imgur.com/hMfpLIK.jpg I took a few pictures of the air cleaner. I cut out pretty much all the steel inside the filter and welded in a new piece with the cut out for the weber. Its kind of ...
- Mon Nov 06, 2017 7:14 pm
- Forum: Tercel Gallery and Projects
- Topic: New strut bar
- Replies: 15
- Views: 5422
Re: New strut bar
Blue bar is the MR2 bar, just a couple inches shorter. It diesn't clear the stock air cleaner. The air clearer is back a to far by about 1"
- Sun Nov 05, 2017 11:05 am
- Forum: Tercel Gallery and Projects
- Topic: New strut bar
- Replies: 15
- Views: 5422
Re: New strut bar
I wouldn't be apposed to making another one, or a couple more if I had the time. I wouldn't be able to get to making another one for a couple weeks. My carb is pieces. I'm waiting on parts before she goes back together. This one took me 3hrs to make. Now that I've made one I'm sure doing it again wo...
- Sat Nov 04, 2017 8:28 pm
- Forum: Tercel Gallery and Projects
- Topic: New strut bar
- Replies: 15
- Views: 5422
New strut bar
Its been a while since I posted, but I got a new phone with a great camera so I took pics of my work today and wanted to share. I've had a modified MR2 strut bar on my car for years. I also have a weber and the small air cleaner so it all fits nice under the hood. Some time back I modified the stock...
- Tue Aug 15, 2017 11:01 pm
- Forum: Repair Guides
- Topic: Steering "U" joint
- Replies: 18
- Views: 13040
Re: Steering "U" joint
I got a hold of my dad last night. He has my first Tercel I wrecked out in his field. He was nice enough to pull the whole steering column for me this evening. Hes coming to my neck of the woods on Friday morning. So I'll have friday after work to see if I can simply swap parts over. I'm in Sacramen...
- Mon Aug 14, 2017 6:22 pm
- Forum: Repair Guides
- Topic: Steering "U" joint
- Replies: 18
- Views: 13040
Re: Steering "U" joint
I just got done with rebuilding my warn out tie-rods only to find that the upper U joint, at the fire wall, has slop in it. All front end "clunks" are gone but this one :( Any advise on getting to that U joint? I pulled a U joint off a power steering rack at the junk yard, so with any luck...
- Wed May 11, 2016 4:19 pm
- Forum: General
- Topic: Its almost adventur time. Rack and Tent install.
- Replies: 12
- Views: 5083
Re: Its almost adventur time. Rack and Tent install.
Thats what I wanted for years, just the platform and put a dome tent on it. Then I shelled out the cash for the fancy one. If you get the dome tent set up post pics! I've thought about it so many times would be neat to see how it works in reality.
- Wed May 11, 2016 2:08 pm
- Forum: General
- Topic: Its almost adventur time. Rack and Tent install.
- Replies: 12
- Views: 5083
Re: Its almost adventur time. Rack and Tent install.
We're going to drive the High Rock Canyon north of Black Rock Desert. Planning on driving from the north end of the canyon down to the back rock desert and then base camping there. Driving out on day trips to the near by hot springs, or maybe we camp at a hot springs. Here is a video of a guy drivin...
- Wed May 11, 2016 11:45 am
- Forum: General
- Topic: Its almost adventur time. Rack and Tent install.
- Replies: 12
- Views: 5083
Re: Its almost adventur time. Rack and Tent install.
Heck yeah, I like your old tent. I hope my tent last as long as yours has. The tent cost $1600. was a hard pill to swallow when I originally bought the tercel for $80. Yeah, the tercel was a shell when I bought it, but still. My friend pointed out that now the car is worth $1680 :mrgreen: But I figu...
- Wed May 11, 2016 12:39 am
- Forum: General
- Topic: Its almost adventur time. Rack and Tent install.
- Replies: 12
- Views: 5083
Re: Its almost adventur time. Rack and Tent install.
Today was tent day! http://i131.photobucket.com/albums/p319/nt_conant/BE165A6B-2743-4237-BD26-A1D9C8003AAF.jpg http://i131.photobucket.com/albums/p319/nt_conant/B24F9626-D27E-4FC8-B28F-72E3A97E365C.jpg http://i131.photobucket.com/albums/p319/nt_conant/B4FF7882-B805-42BD-A78C-154BDA4CCD3B.jpg http://...