Search found 93 matches

by Eatpants
Tue Oct 17, 2006 10:06 pm
Forum: Tercel 4WD Repair Questions
Topic: Rhythmic Rear End Noise
Replies: 48
Views: 19499

this is happening to me too, damn this noise its scary... im going to pull the rear axles and get new bearings pressed in, i'll tell you what happens
by Eatpants
Sat Dec 17, 2005 2:48 pm
Forum: Tercel 4WD Repair Questions
Topic: Front Wheel Stud Problem
Replies: 5
Views: 2494

this happened to me while changing the front transaxles over the summer we had to break two studs off the right front tire because some les schwab in california crossthreaded the lugnuts we heated it up with a propane torch, and i did the honors of jumping on it, two broken studs, we just hammered t...
by Eatpants
Sun Nov 13, 2005 5:00 pm
Forum: General
Topic: got in a wreck the other day
Replies: 2
Views: 1334

got in a wreck the other day

some lady in a purplish blue '00 new beetle collided with me in the suicide lane pretty much completely indented her driver side turn signal abumper/bubble area popped out both my driver side turn signals but no damage to either of them (just popped em back in) bumper is ripped a little though, cant...
by Eatpants
Sun Nov 13, 2005 4:51 pm
Forum: General
Topic: 1948 Hudson Custom Sled Rat Rod Hot Rod
Replies: 8
Views: 4302

i live in boise idaho, i want to see that hudson driving around, dammit
by Eatpants
Tue Nov 08, 2005 7:59 pm
Forum: General
Topic: Made a small site for my Tercel
Replies: 6
Views: 2220

i need to adjust my valve lash, any tips/instruction?
by Eatpants
Tue Nov 08, 2005 7:55 pm
Forum: General
Topic: toyota vans
Replies: 3
Views: 1609

toyota vans

i drove an 86 toyota van today, i think im in love
by Eatpants
Tue Nov 08, 2005 7:55 pm
Forum: Tercel 4WD Repair Questions
Topic: 1984 Tercel 4WD shifter
Replies: 3
Views: 1506

ive got an 83 (might be an 84 not sure) parts car located in boise idaho if need be
by Eatpants
Tue Nov 08, 2005 5:30 am
Forum: Tercel 4WD Repair Questions
Topic: rough idle
Replies: 8
Views: 3532

yesterday the same thing happened to my blue tercel naturally i love that car a ton more than the silver one so i attacked the mixture adjustment, seating the screw fully as said in the manual, then backing out 3 and 1/4 turns... now the screwdriver i used really sucked but i know i got somewhere ne...
by Eatpants
Thu Oct 27, 2005 12:40 pm
Forum: Tercel 4WD Repair Questions
Topic: Please don't make fun of me for this one...
Replies: 5
Views: 2180

on my 86 wagon(s) its right behind the carburetor
by Eatpants
Wed Oct 26, 2005 2:45 pm
Forum: Tercel 4WD Repair Questions
Topic: rough idle
Replies: 8
Views: 3532

B vaccum switch was already removed and plugged on both ends so i guess i should mess with the mixture now? any other ideas?

thanks
by Eatpants
Tue Oct 25, 2005 12:13 pm
Forum: Tercel 4WD Repair Questions
Topic: rough idle
Replies: 8
Views: 3532

it did the same thing before the rebuild
which is why i decided to rebuild it in the first place haha

mixture plug has been drilled out from whoever rebuild it last, they did a keen drilling job too (sarcasm) but it works

whats the B vaccum hose?
by Eatpants
Sun Oct 23, 2005 6:15 am
Forum: Tercel 4WD Repair Questions
Topic: rough idle
Replies: 8
Views: 3532

rebuild a carburetor on an 86 sr5 wagon, hoping to fix the rough idle, it goes up and down and drops too low and dies

any ideas?
by Eatpants
Wed Oct 19, 2005 1:53 pm
Forum: Tercel 4WD Repair Questions
Topic: rebuilding carb
Replies: 1
Views: 1206

carb only had metal washers on screws and stuff

but the kit gave me all o rings?

so... o rings or washers?
by Eatpants
Wed Oct 19, 2005 4:27 am
Forum: Tercel 4WD Parts: New and Used
Topic: Choke pull down vacum for 1986
Replies: 3
Views: 2025

i do on my 83 ... but what is it exactly? pic? =/

oh wait you want 86...sorry
by Eatpants
Wed Oct 19, 2005 4:25 am
Forum: Tercel 4WD Repair Questions
Topic: rebuilding carb
Replies: 1
Views: 1206

trying to get the silver one running again, i stripped like 5 screws, whoever did the last rebuild must have used a drill or something this is my first carb rebuild ive done myself, i never want to do it again haha napa wanted 45 bucks for carburetor dip so i used a 40 year old can of carb cleaner (...