looking for parts in MN
looking for parts in MN
Hey all, stupid deer got me, anyone close have any parts. Mainly in search of a decent hood, upper radiator support passenger headlight bezel, it did get the fan and radiator, but can get those new. Did not touch the fenders or wreck the bumper or grill to bad, one broken tab on the grill. Would be willing to travel or pay shipping. Insurance company totaled it out, I was able to buy it back for $267.
- 4wdEconoBox
- Top Notch Member
- Posts: 461
- Joined: Sun Apr 05, 2015 6:56 pm
- My tercel:: 1985 Toyota Tercel SR5 4WD
- Location: Talladega, Alabama
Re: looking for parts in MN
Ohh wow, sorry about your luck, hopefully no one was injured! I'm actually surprised that they totaled it out, at least you were able to buy it back!! Shouldn't be too hard to fix either. Sadly I don't have any parts you need, but good luck man!!
Re: looking for parts in MN
I finally found a hood, still searching for the upper radiator support....anybody?
- BaileySims
- Highest Ranking Member
- Posts: 630
- Joined: Sat Aug 30, 2014 6:52 pm
- My tercel:: 1983 Tercel SR5 4WD
- Location: Texas
- Contact:
Re: looking for parts in MN
I could get you one that you'd have to bend back in place a little bit?
WAGON MAFIA.
Blood, sweat and beers.
Blood, sweat and beers.
-
- Highest Ranking Member
- Posts: 515
- Joined: Thu Dec 08, 2011 6:33 pm
- My tercel:: 1985 4wd 1986fwd 1983 4wd
Re: looking for parts in MN
I got 1/2 dozen of them but shipping cost will be ridiculous, just sent a bare strut to Georgia weighed 4-1/2 pounds cost $48.00 at ups store
Re: looking for parts in MN
Where are you located, I would be willing to pay shipping for a clean straight one, fedex is usually cheaper I have foundjimcrazy wrote:I got 1/2 dozen of them but shipping cost will be ridiculous, just sent a bare strut to Georgia weighed 4-1/2 pounds cost $48.00 at ups store
Re: looking for parts in MN
Thank you for the offer, if I cant find a good one I will let you know, I could probably pull mine back to make it work as last resort, it is bent back to the point the radiator is on motorBaileySims wrote:I could get you one that you'd have to bend back in place a little bit?
-
- Highest Ranking Member
- Posts: 515
- Joined: Thu Dec 08, 2011 6:33 pm
- My tercel:: 1985 4wd 1986fwd 1983 4wd
Re: looking for parts in MN
i am in nova scotia Canada, post a pic of the piece you want, I have 7 parts wagons
- irowiki
- Highest Ranking Member
- Posts: 3463
- Joined: Tue Apr 02, 2013 10:02 am
- Location: Farmington, NM
Re: looking for parts in MN
Yeah, I can concur that Canada to US shipping is bat crap crazy!
Former Tercel Enthusiast (not a practical family car anymore but they still have a place in my heart)
Site administrator, if something is broken, PM me!
87 Corolla FX16, 105k
94 Jamboree RV (Ford E-350), 90k
95 Camry Wagon, 170k
97 4runner, 275k
Site administrator, if something is broken, PM me!
87 Corolla FX16, 105k
94 Jamboree RV (Ford E-350), 90k
95 Camry Wagon, 170k
97 4runner, 275k
Re: looking for parts in MN
thanks for that, I may have come up with a couple of parts cars really close to me, I do appreciate the offer and will let you know if parts cars don't work outjimcrazy wrote:i am in nova scotia Canada, post a pic of the piece you want, I have 7 parts wagons
Re: looking for parts in MN
Got my car straightened out, hood is on and everything lines up pretty good, still need to paint the hood. Is there any where to source the clips that hold the grill and headlight bezel in place? Also I am looking for a nice right hand side headlight bezel and right marker light, mine did get cracked and is stuffed full of deer hair. Is there vertical adjustment on the front bumper as the right side sits tight to the headlight bezel an the left sits down about 3/4 of an inch. In searching for parts I stumbled across a set of Mr2 triangle style wheels, going to soda blast an powder coat white and dress them whit 195/75/14 BFG AT tires....hope they fit with no lift, if not will be working on doing that as well
Re: looking for parts in MN
Bought clips from the dealer years ago- they were pretty cheap as I recall. Think the PN is 90467-12020.
if it aint there, there's a good chance it won't break!
83 SR5 Silver/Blue (Snowmobile/work beater)-totaled but drivable
85 SR5 Blue
88 SR5 White (the 'good' one)-not anymore-totaled
87 fwd silver wagon a/t
87 4wd dx Cream (a/t- not anymore- now m/t)
83 SR5 Silver/Blue (Snowmobile/work beater)-totaled but drivable
85 SR5 Blue
88 SR5 White (the 'good' one)-not anymore-totaled
87 fwd silver wagon a/t
87 4wd dx Cream (a/t- not anymore- now m/t)