Parts parts parts

Need a car part and don't know where to get it or how to install it. Look here!
Post Reply
YotaNerd
Newbie
Posts: 3
Joined: Fri Jan 08, 2016 5:56 pm

Re: Parts parts parts

Post by YotaNerd »

Started a new thread before I saw this one, but I am after a driver-side knuckle (preferably with the lbj and as much hardware as possible) for a '83 4WD Wagon
User avatar
cabinguyvt
Newbie
Posts: 5
Joined: Sun Feb 07, 2016 4:30 am
My tercel:: 1983 SR5 4x4 wagon
Location: Bristol Vt

Re: Parts parts parts

Post by cabinguyvt »

thermostatic vacuum switch? Mine is an 83, pretty sure right up to the end they all had them. part number is 9092502076
Thanks, Rich
User avatar
Gottolovem
Highest Ranking Member
Posts: 1637
Joined: Fri Jun 29, 2012 4:28 pm
My tercel:: 1985 SR5 with snow plow,1987 auto 1984 parts car,1987 FX-16 GTS
Location: Reno

Re: Parts parts parts

Post by Gottolovem »

cabinguyvt wrote:thermostatic vacuum switch? Mine is an 83, pretty sure right up to the end they all had them. part number is 9092502076
Thanks, Rich
TVSV's are a part you should get direct from toyota(expensive) :shock:


I can send one to you but it's old and prob not working :oldgeek:
xirdneh
Highest Ranking Member
Posts: 2121
Joined: Thu Aug 04, 2005 11:38 am
My tercel:: 87 tercel 4x4 wagon w/reringed engine, 83 tercel 4x4 wagon w/salvaged engine and 4.1 Diff's
Location: seabeck, washington, USA

Re: Parts parts parts

Post by xirdneh »

"repair guides". "Tvsv repair attempt".
If your interested in testing or repairing one?
Love those Tercell 4x4 wagons but they sure suffer from road noise.
User avatar
cabinguyvt
Newbie
Posts: 5
Joined: Sun Feb 07, 2016 4:30 am
My tercel:: 1983 SR5 4x4 wagon
Location: Bristol Vt

Re: Parts parts parts

Post by cabinguyvt »

I broke down and bought a new one. Have to bite the bullet sometimes!
gnarnold
Top Notch Member
Posts: 325
Joined: Sat Jan 04, 2014 7:28 am
My tercel:: 1983 SR5 4x4 with a tummy tuck and a nose job and now a pace maker!
Location: jordache ,ca

Re: Parts parts parts

Post by gnarnold »

Gottolovem wrote:
cabinguyvt wrote:thermostatic vacuum switch? Mine is an 83, pretty sure right up to the end they all had them. part number is 9092502076
Thanks, Rich
TVSV's are a part you should get direct from toyota(expensive) :shock:


I can send one to you but it's old and prob not working :oldgeek:
I had to buy one a few years back from the Toyota dealership. And if I remember correctly it was over 100 $ .yes .that's right ,over 100$ . I wanna say 140$ but I know it was at least 100$..
They kinda got you over a barrel because with out it the car will barely function if it does at all .
I used to laugh at the man with a pinto :lol: , until I became a humble servicer of a tercel :|
The Professor
Highest Ranking Member
Posts: 650
Joined: Wed May 12, 2010 6:38 pm
My tercel:: 1987 Tercel SR5 4WD wagon
Location: Western Washington
Contact:

Re: Parts parts parts

Post by The Professor »

I'm in need of a few parts as well:

Undamaged blue front seat belt assemblies
Fully functional windshield wiper switch
passenger's side composite headlamp housing
blue e-brake handle in good, lightly worn condition
Blue/grey '87 drivers seat

Let me know if you have any of these parts. Thanks!
1975 Subaru SuperStar wagon
1984 Subaru Turbo-Traction wagon & hardtop
1987 Subaru RX 3-door
1987 Subaru RX Type-RA 3-door
1987 Toyota Tercel SR5 wagon
1999 Subaru Forester S
2002 Subaru WRX sedan
2019 Subaru Outback 2.5i Limited
User avatar
Gottolovem
Highest Ranking Member
Posts: 1637
Joined: Fri Jun 29, 2012 4:28 pm
My tercel:: 1985 SR5 with snow plow,1987 auto 1984 parts car,1987 FX-16 GTS
Location: Reno

Re: Parts parts parts

Post by Gottolovem »

The Professor wrote:I'm in need of a few parts as well:

Undamaged blue front seat belt assemblies
Fully functional windshield wiper switch
passenger's side composite headlamp housing
blue e-brake handle in good, lightly worn condition
Blue/grey '87 drivers seat

Let me know if you have any of these parts. Thanks!
Sorry but none of the above kinda low on parts right now :oldgeek:
timothygodden
Top Notch Member
Posts: 163
Joined: Mon Dec 31, 2012 12:45 am
My tercel:: 84 tercel 4wd sr5 lifted, modified head, delta cam, 2" exhaust
Location: seattle wa

Re: Parts parts parts

Post by timothygodden »

Need a heater control valve, mine leaked horribly it is bypassed now the heat is always on.
gnarnold
Top Notch Member
Posts: 325
Joined: Sat Jan 04, 2014 7:28 am
My tercel:: 1983 SR5 4x4 with a tummy tuck and a nose job and now a pace maker!
Location: jordache ,ca

Re: Parts parts parts

Post by gnarnold »

Put it on cool or defrost
Slide the selector to your desired temp and it all gravvy
I used to laugh at the man with a pinto :lol: , until I became a humble servicer of a tercel :|
BowieTercel
Newbie
Posts: 24
Joined: Sun Mar 06, 2016 7:35 am
My tercel:: 1984 Toyota Tercel SR5

Re: Parts parts parts

Post by BowieTercel »

hi there, do you have any of the following - mine's an '84? i'm doing a full restore and looking for very nice parts only, otherwise i'll get on doing things with mine such as trying to glue plastic parts and repaint. i have the blue plaid interior so that's the color i need, thanks.

shifter knob (though not the transfer shifter nob)
steering wheel
e-brake handle and skirt
between the front seats console
both shifter boots (skirts)
license plate trim piece (the whole light ensemble)
driver seat belt
driver seat plaid fabric (it could be pulled off the seat)
cruise control contraption - so the guy i bought this little rig from swapped the motor with a rebuilt 4a so i think that came out of camry? he installed the cruise control knob control on the steering wheel but the part that connects everything under the hood and to the carb has a frayed cable end that i don't think i can repair.
visors and clips that hold the end of the visor the headliner
decent headliner?

Thanks, please let me know what you want for them and perhaps we can set up a bundle through ebay or let me know how you like to make arrangements.
timothygodden
Top Notch Member
Posts: 163
Joined: Mon Dec 31, 2012 12:45 am
My tercel:: 84 tercel 4wd sr5 lifted, modified head, delta cam, 2" exhaust
Location: seattle wa

Re: Parts parts parts

Post by timothygodden »

gnarnold wrote:Put it on cool or defrost
Slide the selector to your desired temp and it all gravvy
Control valve has been removed, it leaked as previously stated, just a metal elbow there now cannot slide selector to desired temp as it attached to nothing.

Still need one if you got one.
User avatar
ARCHINSTL
Goldie Forever
Posts: 6369
Joined: Sat Apr 30, 2005 1:52 pm
My tercel:: Goldie is a 1986 SR5 attualmente con Weber/also owned the first T4WD in STL in late '82
Location: Kirkwood, a 'burb of St. Louis

Re: Parts parts parts

Post by ARCHINSTL »

As a temporary fix - why not just plumb in a valve like this? They are available in various diameters.
http://www.homedepot.com/p/SharkBite-3- ... /202270560
Tom M.
T4WD augury?
"Oh, do not ask, 'What is it?' Let us go and make our visit."
T.S. Eliot - "The Love Song of J. Alfred Prufrock"
"Now and then we had a hope that, if we lived and were good, God would permit us to be pirates."
Mark Twain
User avatar
Gottolovem
Highest Ranking Member
Posts: 1637
Joined: Fri Jun 29, 2012 4:28 pm
My tercel:: 1985 SR5 with snow plow,1987 auto 1984 parts car,1987 FX-16 GTS
Location: Reno

Re: Parts parts parts

Post by Gottolovem »

:oldgeek: The cars that started this thread are long gone although I still have lots of Parts they're not pristine and they're getting rather thin I think perhaps it's time to close this thread down sorry everyone or anyone else on the form that may have some of these parts feel free to chime in and offer up your own I realize this is one long run-on sentence but I'm driving a 50 foot rig down Highway 1 having a good time on vacation :oldgeek:
timothygodden
Top Notch Member
Posts: 163
Joined: Mon Dec 31, 2012 12:45 am
My tercel:: 84 tercel 4wd sr5 lifted, modified head, delta cam, 2" exhaust
Location: seattle wa

Re: Parts parts parts

Post by timothygodden »

ARCHINSTL wrote:As a temporary fix - why not just plumb in a valve like this? They are available in various diameters.
http://www.homedepot.com/p/SharkBite-3- ... /202270560
Tom M.
good temporary fix thanks. Would one from an ae86 work? It has two mounting spots but looks similar other than that.
Post Reply