Tercel4WD.com

Oh man I wish I had done it that way - super easy in contrast.

Peel out plastic membrane (I cut it out and retape it up to use as a pattern for dynamatting later). You need to pry the inner window bottom rubber moulding up to remove then the whole panel will lift off after you popped all the trim clips. That PILLAR that divides the two windows comes out next fo...

Quick return to that bumper my wife just removed after a long time with the offset box wrench. I never knew what an offset wrench was before so here it is:

REAR DOORS: remove 3x phillips screws in armrest, handle, and opener lever. To remove manual window cranks lever the crank away from the panel with a trim tool then use a cloth and work the clip out from the back.

WINDSHILD WIPER ARMS: plastic foot rotates up exposing a nut with normal threads (lefty loosey) I call these the WINDSHIELD GRILL: open hood unscrew 6 screws, remove rubber piece. Close hood slide grill forward then up and out. Lower WINDSHIELD TRIM MOUNTS can now be unscrewed and removed (8 of em)....

It's time for new paint so this thread will be about our process of getting the little rig ready for the paint shop. Our tercel came from a very dry climate and we continue to be amazed by the lack of rust. Due to the heat of said climate however, a lot of our plastics had been hurt by the sun inclu...

Towed the car home this morning (still wouldn't start) and then went to Napa to get a fuel filter and starter spray and ended up talking to an older gentleman who guessed that I had vapor lock. Sure enough, went home and tried it again and it started. Looks like I need to throw some insulation tape ...

Ever feel like you're finally getting somewhere with having your Tercel be near perfect - and then something happens? Yeah, that's how today is going for me. It's a pretty hot day here in CO - around 100 degrees. My wife and I jumped into the Tercel to head home from my work and as I am driving, all...

I'm taking in the little rig next week to get a professional paint job and I am saving money by removing all the trim. I do have a question though, does anyone have advice on the window trim seal (I'm not sure what that's called) because I'm guessing if I pull it off I would need new moulding to rei...

Good news, everyone! Thanks to the members who got me some parts to help with emissions, we passed! Barely, but we passed! Next step is getting a professional paint job.

Would really love to install a tape deck into my SR5 (I just have the radio and storage space beneath). Any one have one that they would like to sell me?

That would be great gottolovem, those hard vac lines will save me lotta trouble. pls let me know how i can pay for them.

One of the members had a lot of the items so I'm almost ready to attempt to put this thing together but here are the final parts I am still looking for if anyone has them they can part with: EGR Vacuum Modulator 3 port MC valve Connecting tubes - i'll get new vacuum tubing but i don't have any of of...

Thanks guys so much I hope this all works out. I think this is the emissions plate stating it is a 3a-c, again we have a 4a engine but trying to meet the 3a-c emissions rigging. Then here are more shots of the passenger side without the air filter.