Search found 49 matches
- Sat Jul 14, 2018 2:37 pm
- Forum: Cars for sale
- Topic: SOLD. Selling '83 Tercel Wagon, w/ orig. FSM & *lots* of parts
- Replies: 0
- Views: 2325
SOLD. Selling '83 Tercel Wagon, w/ orig. FSM & *lots* of parts
SOLD. ASKING: $1,200. I live in Eugene, OR. ALSO FOR SALE ON CL IN EUGENE: https://eugene.craigslist.org/cto/d/1983-toyota-tercel-4wd-wagon/6729690517.html HIGHER RES PICTURE SLIDE SHOW HERE: https://docs.google.com/presentation/d/1iBtRtpTkq3rGBI2vnKnapEGoh_OaB7F94L2hWRLBYXU/edit?usp=sharing THE WHY...
- Mon Jan 02, 2017 4:24 pm
- Forum: Tercel 4WD Repair Questions
- Topic: IGNITION SWITCH STUCK
- Replies: 15
- Views: 6754
Re: IGNITION SWITCH STUCK
Just encountered the same issue: could get key in, but couldn't turn even to ACC...had been getting worse over couple of months to the point I could no longer turn car over. Had errand to run, but was stuck. Took out lock assembly (only need to take dash cowl two bottom screws out and move it up out...
- Wed Jan 27, 2016 10:32 am
- Forum: Tercel 4WD Repair Questions
- Topic: Steering momentarily locked-up, mid-turn
- Replies: 19
- Views: 4686
Re: Steering momentarily locked-up, mid-turn
Thanks jimcrazy! Good to know. Update: went with eBay OEM Kawasaki spider (49050-1055). Worked great. One warning if you are doing this for the first time like I was: only drive/hammer/press the new caps so they are flush with the yoke shoulder. I pressed the caps about 1/16" into the yoke and ...
- Wed Jan 27, 2016 8:08 am
- Forum: Tercel 4WD Repair Questions
- Topic: Steering momentarily locked-up, mid-turn
- Replies: 19
- Views: 4686
Re: Steering momentarily locked-up, mid-turn
Hey Guys,
Just to confirm, the 19-1010 fits all years ('83-'87) yokes, right? I know 83-84 had different assembly, but I am guessing Toyota used same U-joint bearing set up in same yoke. My '83 manual steering has this exact issue.
Just to confirm, the 19-1010 fits all years ('83-'87) yokes, right? I know 83-84 had different assembly, but I am guessing Toyota used same U-joint bearing set up in same yoke. My '83 manual steering has this exact issue.
- Fri Apr 25, 2014 11:51 am
- Forum: Tercel 4WD Repair Questions
- Topic: Won't Time:Starts cold, runs 45* BTDC, stalls when warm
- Replies: 17
- Views: 4332
Re: Won't Time:Starts cold, runs 45* BTDC, stalls when warm
Yeah, I am leaning towards plugging and forgetting it. Seems to simply go to the pre-heater hose flap in the front of the cleaner as you say--I'll close that flap. B&R (in Chehalis) wants to charge $25 to throw a $25 air cleaner assembly on the truck--that probably already makes the I-5 journey ...
- Tue Apr 22, 2014 10:48 pm
- Forum: Part Numbers - OE and Aftermarket
- Topic: Download full exploded PNC diagrams w/ OEM part#'s
- Replies: 9
- Views: 7714
Re: Download full exploded PNC diagrams w/ OEM part#'s
irowiki: thanks for hosting the file!
Gottolovem: offering to print up and bind is awesome and makes me very happy.
Thanks guys.
Gottolovem: offering to print up and bind is awesome and makes me very happy.
Thanks guys.
- Tue Apr 22, 2014 9:43 pm
- Forum: Tercel 4WD Repair Questions
- Topic: Won't Time:Starts cold, runs 45* BTDC, stalls when warm
- Replies: 17
- Views: 4332
Re: Won't Time:Starts cold, runs 45* BTDC, stalls when warm
Might have the culprit: the HIC valve failed two of the tests indicated in the FSM. Didn't bother heating it up to 85 degrees to do the last test.
- Mon Apr 21, 2014 10:43 pm
- Forum: Tercel 4WD Repair Questions
- Topic: Won't Time:Starts cold, runs 45* BTDC, stalls when warm
- Replies: 17
- Views: 4332
Re: Won't Time:Starts cold, runs 45* BTDC, stalls when warm
irowiki: good call, I'll double check the connection. Thanks for offer. I will see if it fails test.
- Mon Apr 21, 2014 10:03 pm
- Forum: Tercel 4WD Repair Questions
- Topic: Won't Time:Starts cold, runs 45* BTDC, stalls when warm
- Replies: 17
- Views: 4332
Re: Won't Time:Starts cold, runs 45* BTDC, stalls when warm
Thanks guys: good news, update! Think dlb made a wise bet. I took dlb's advice and tried plugging the HIC line (the one that goes from air cleaner to throttle plate) and left everything else hooked up. Fired right up, drove it to get up to operating temp and I pulled over. Got out, expecting it to s...
- Mon Apr 21, 2014 1:17 pm
- Forum: Tercel 4WD Repair Questions
- Topic: Won't Time:Starts cold, runs 45* BTDC, stalls when warm
- Replies: 17
- Views: 4332
Re: Won't Time:Starts cold, runs 45* BTDC, stalls when warm
Hi irowiki, nope, the distributor is installed correct. More I troubleshoot it more I think dlb and Mark are correct: my post title should take out the timing reference and make it about a vac system issue. dlb had great point that shifted my focus: absolutely no point in timing at fast idle because...
- Mon Apr 21, 2014 12:06 pm
- Forum: Tercel 4WD Repair Questions
- Topic: Won't Time:Starts cold, runs 45* BTDC, stalls when warm
- Replies: 17
- Views: 4332
Re: Won't Time:Starts cold, runs 45* BTDC, stalls when warm
I'll run the diagnosis you suggest when I get home from work today. I think we are getting close to trouble shooting it.
Stay tuned.
Stay tuned.
- Sun Apr 20, 2014 2:16 pm
- Forum: Tercel 4WD Repair Questions
- Topic: Won't Time:Starts cold, runs 45* BTDC, stalls when warm
- Replies: 17
- Views: 4332
Re: Won't Time:Starts cold, runs 45* BTDC, stalls when warm
Update: I was able to set the fast idle per FSM. Sounded great. Shut it down. Reconnected the two hoses it instructs you to disconnect and plug (HIC and TVSV M port) and reinstalled air cleaner. Started back up and stalls out. Took off cleaner and disconnect hoses per fast idle set instructions agai...
- Sun Apr 20, 2014 10:04 am
- Forum: Tercel 4WD Repair Questions
- Topic: Won't Time:Starts cold, runs 45* BTDC, stalls when warm
- Replies: 17
- Views: 4332
Re: Won't Time:Starts cold, runs 45* BTDC, stalls when warm
Thanks guys. dlb: you answered one of the questions I thought about yesterday--should I try to get the fast idle down then try timing it. Makes sense if the fuel and air is dialed in even an out of timed engine could chug along. Other sytmptoms: prior to this work it was running, but idling fast. I ...
- Sun Apr 20, 2014 12:04 am
- Forum: Part Numbers - OE and Aftermarket
- Topic: Download full exploded PNC diagrams w/ OEM part#'s
- Replies: 9
- Views: 7714
Re: Download full exploded PNC diagrams w/ OEM part#'s
I always assumed it was part number catalog, but think I may have just made that up.
Yeah, I run Ubuntu and they are shutting down their free cloud file server feature...download the file quick! Not sure when I'll get around to setting up another location on a cloud.
Yeah, I run Ubuntu and they are shutting down their free cloud file server feature...download the file quick! Not sure when I'll get around to setting up another location on a cloud.
- Sat Apr 19, 2014 11:56 pm
- Forum: Tercel 4WD Repair Questions
- Topic: Won't Time:Starts cold, runs 45* BTDC, stalls when warm
- Replies: 17
- Views: 4332
Won't Time:Starts cold, runs 45* BTDC, stalls when warm
Issue: I can easily start engine cold. It runs--fast. Timing light is showing at least 45* BTDC, probably more. I peg out the distributor adjustment bolt groove (all the way to the left as you look straight on) and can get it to maybe 40*. I take off, and plug, vac advance tube and it retards, but o...